Product range — actual catalogue images
The product images below are hosted on the manufacturer's official website (seimthydraulics.com) and link directly to the manufacturer's catalogue. Click any image to view the full specification page in a new tab.
Axial piston pumps + motors — variable and fixed displacement, 250-450 bar pressure rating.
Vane pumps + motors — fixed displacement, 70-210 bar, for low-noise auxiliary circuits.
Piston pump + motor spare parts — cylinder blocks, swashplates, valve plates, shoe assemblies.
Vane pump + motor spare parts — rotor assemblies, vanes, cam rings, shaft seals.
Choosing between piston and vane pumps
| Parameter | Axial piston pump | Vane pump |
|---|---|---|
| Continuous pressure | 250-450 bar | 70-210 bar |
| Peak pressure | 280-500 bar | 175-250 bar |
| Displacement range | 10-500 cc/rev | 5-200 cc/rev |
| Variable displacement available? | Yes (swashplate angle) | Limited (cam ring offset) |
| Maximum speed | 1,800-3,000 rpm | 1,200-1,800 rpm |
| Volumetric efficiency | 92-96% | 85-92% |
| Service life (hours, properly applied) | 10,000-15,000 | 4,000-8,000 |
| Noise level | 78-86 dBA | 72-78 dBA |
| Sensitivity to fluid contamination | High (NAS 8 or better required) | Moderate (NAS 9 acceptable) |
| FOB China price (mid-size) | USD 600-2,200 | USD 250-900 |
| Best for | High-pressure, variable load, continuous duty | Low-pressure auxiliary, intermittent duty, tight noise budget |
OEM cross-reference — the document that wins the order
For aftermarket sourcing, the document that wins the order is the cross-reference table mapping the supplier's part number to the OEM (Bosch Rexroth, Parker, Eaton, Vickers, Yuken, Kawasaki) part number being replaced. A good cross-reference document includes:
Before placing a sample order, ask the supplier these two questions:
The first answer separates engineering capability. The second answer separates QA capability. Both must pass before sample order.
- Dimensional verification — mounting flange (SAE A/B/C/D, ISO 3019-1/2), shaft profile (keyed, splined, taper), port locations and sizes (SAE J518, BSP, NPT, metric)
- Pressure and flow specs — continuous and peak pressure, nominal displacement at rated speed
- Drive direction — clockwise / counter-clockwise / bi-directional
- Control mode for variable pumps — pressure compensator, load-sensing, torque limiter, hydraulic stroker
- Materials — cast iron / nodular iron / aluminum housing; case-hardened steel internals
- "Can you send a cross-reference document showing your part number against the OEM part I'm replacing?" A real manufacturer responds within 24 hours with a structured table. A trader sends a marketing brochure or a single-line "yes we can do it."
- "What's the pressure test certificate format you provide with each shipment?" A real manufacturer describes the test stand, pressure ramp profile, and acceptance criteria. A trader says "we will provide a test certificate."
Application guide — what pump for what equipment
| Application | Typical pump type | Pressure range | Notes |
|---|---|---|---|
| Mobile crane (truck-mounted) | Axial piston, variable, load-sense | 280-350 bar | Often paired with closed-loop slewing motor |
| Marine deck crane | Axial piston, variable | 280-320 bar | Saltwater-grade seals and corrosion-protected casing |
| Excavator main pump | Axial piston, dual variable | 280-350 bar | Tandem unit driving boom + travel circuits |
| Hydraulic press (50-200 ton) | Axial piston, fixed | 250-320 bar | Bent-axis design for higher pressure ranges |
| Injection moulding machine | Vane (clamping) + piston (injection) | 175-280 bar | Tandem pump configuration common |
| Plate compactor / asphalt roller | Axial piston, closed-loop | 320-420 bar | Hydrostatic transmission with built-in charge pump |
| Machine tool auxiliary circuit | Vane, fixed displacement | 70-140 bar | Low noise priority; cost-sensitive selection |
| Aerial lift / scissor platform | Vane (lift) + piston (drive) | 140-280 bar | Pump grouped with electric motor as power-pack module |
Pricing brackets — what you should pay
The price gap between premium and budget Chinese aftermarket reflects material grade and assembly QA, not just margin. Premium-tier uses case-hardened bearing steel for cylinder blocks (HRC 58-62), GCr15 for piston shoes, and Viton or PTFE seals. Budget-tier substitutes lower-grade steel and NBR seals, which trims FOB cost by 35-50% but cuts continuous-duty service life by 40-60%. For applications running 4+ hours daily, premium-tier amortizes better despite higher purchase cost.
| Pump category | Genuine OEM price | Tier-1 European brand | Premium Chinese aftermarket FOB | Budget Chinese FOB |
|---|---|---|---|---|
| Small piston pump (10-30cc, 250 bar) | USD 1,800-3,200 | USD 800-1,400 | USD 350-700 | USD 180-380 |
| Mid piston pump (30-90cc, 320 bar) | USD 3,200-6,500 | USD 1,500-2,800 | USD 600-1,400 | USD 320-700 |
| Large piston pump (90-200cc, 350 bar) | USD 5,800-10,000 | USD 2,800-4,800 | USD 1,200-2,200 | USD 650-1,300 |
| Variable piston pump w/ load-sense | USD 4,500-9,000 | USD 2,200-4,000 | USD 950-1,800 | USD 500-1,000 |
| Vane pump (small, 70 bar) | USD 450-800 | USD 220-400 | USD 95-180 | USD 50-100 |
| Vane pump (mid, 140-210 bar) | USD 800-1,500 | USD 400-750 | USD 180-350 | USD 95-200 |
Material and certification considerations
A reputable Chinese hydraulic pump manufacturer should be able to provide on request:
If the supplier hesitates on any of these or sends generic factory photos instead of specific test data, walk away. Real manufacturers have these documents pre-prepared.
- ISO 9001:2015 certificate — quality management baseline
- CE compliance declaration — required for EU shipments
- Material certificates — chemical composition + hardness for cylinder block, swashplate, valve plate
- Pressure test certificate — per-pump record showing pressure ramp, hold time, and leak test result
- Noise test certificate — measurement at 1m distance, full load, rated speed
- Documented continuous-duty rating — pressure × flow × hours guaranteed
Order workflow — from inquiry to delivery
View the full supplier profile, certifications, contact details, and complete product catalogue.
SEIMT Hydraulics — China-based hydraulic pump and motor manufacturer specializing in axial piston pumps, vane pumps, hydraulic motors, and OEM-equivalent spare parts. Cross-reference for major OEM brands: Rexroth, Parker, Eaton, Vickers, Yuken, Kawasaki. Marine, industrial, and mobile machinery applications.
- Initial inquiry — send the OEM part number you're replacing or the technical specification (pressure, flow, displacement, mounting)
- Cross-reference document — supplier returns within 24-48 hours with their equivalent part number, dimensional verification, and FOB quote
- Sample order — 1-2 units with full pressure test certificate, typically 25-35 day lead time, FOB China
- Bench test on your test stand — verify pressure curve, flow at different loads, noise level, internal leakage
- First production order — 5-20 units, typically 35-50 day lead time including certificate set
- Series production — once supplier qualified, 50-100+ units per shipment, typically 35-60 day lead time
Frequently asked questions
Real Norwegian inquiry for hydraulic pumps, gearboxes, and servo valves to refurbish two MacGregor cranes.
DRC fleet operator's 10-line BOM — engines + filters + gaskets. Aftermarket-fit cross-reference.
Aftermarket-fit suspension and steering parts for European vehicles — buyer's sourcing guide with real product images.
Source: Product images on this page are hosted on the manufacturer's official website (seimthydraulics.com) and link directly back to that website. All product information was summarised from the supplier's public catalogue.
Brand mentions: References to Bosch Rexroth, Parker, Eaton, Vickers, Yuken, Kawasaki, Sauer-Danfoss, and Hawe are made for the sole purpose of describing fitment compatibility and recognized component-supplier benchmarks. SEIMT Hydraulics is not authorized by any of these brand owners. Products are aftermarket-fit cross-reference parts manufactured under SEIMT's own brand. Buyers are responsible for confirming compatibility, certification, and import compliance.
Pricing & specifications: All price ranges, output specifications, and lead-time figures reflect general market observation and may not apply to specific orders. Confirm current pricing, MOQ, and configuration directly with the supplier.
No middleman role: CifyChina provides supplier discovery and editorial content. All transactions occur directly between buyer and supplier through the contact channels published on the supplier's official website.
Verified China manufacturer + B2B supplier directory. 601 supplier profiles across 26 industries. Real buyer inquiries. Real product guides for international procurement.
- ⚙️ Industrial Machinery
- 👕 Apparel + Textile
- 🏡 Home + Kitchen
- MacGregor Crane (Norway)
- HVAC Parts (Brazil)
- Cayenne Parts (Qatar)
- Paper Bag Machine (Tanzania)
- E-Motorcycles (USA)
- Volvo S80 Suspension (DRC)
- Diesel Engine (DRC)
- → Browse all inquiries
- Hydraulic Piston Pumps
- Marine Hydraulics
- LC1D AC Contactors
- Diesel Filter Cross-Ref
- KRA Aftermarket Auto Parts
Have a similar requirement? Send the spec or drawing on WhatsApp and we will match it against the 591 suppliers in the directory.