Product range — actual catalogue images
The product images below are hosted on the manufacturer's official website (gymarine.com) and link directly to the manufacturer's catalogue. Click any image to view the full specification page in a new tab.
Marine equipment + tools collage — brass deck plugs, pipe fittings, surface preparation tools.
Marine deck hardware sample — fittings range across ferrous and non-ferrous metallurgy.
Marine deck plug and gland fittings — bronze and rubber seal variants.
Marine pipe fittings and connectors — brass and stainless variants for shipboard plumbing.
Marine hardware product categories
| Category | Common items | Materials | Typical FOB China per item |
|---|---|---|---|
| Deck plugs and drains | Brass deck plugs, rubber drain stoppers, scupper plugs, sounding plugs | Brass, bronze, stainless 316, rubber | USD 0.85-12.00 per unit |
| Pipe fittings (small bore) | Elbows, tees, reducers, unions, flanges, plugs | Brass, bronze, copper, stainless 304/316 | USD 0.45-18.00 per unit |
| Mooring hardware | Mooring bollards (small), cleats, fairleads, chocks, ring bolts | Cast steel, ductile iron, hot-dip galvanized | USD 4.50-180.00 per unit |
| Anchor fittings | Shackles, swivels, anchor connectors, kenter shackles | Hot-dip galvanized cast steel, drop-forged steel | USD 2.50-95.00 per unit |
| Deck hardware (small) | Padeyes, eye bolts, cargo hooks, lashing rings, U-bolts | Galvanized steel, stainless 316, drop-forged | USD 0.85-22.00 per unit |
| Ventilation fittings | Cowl ventilators, mushroom vents, dorade boxes, deck collars | Stainless 316, brass, fiberglass | USD 18.00-220.00 per unit |
| Hose fittings | Camlock fittings, BSP/NPT adapters, hose tails, hose bands | Brass, stainless 316, cast iron | USD 0.65-15.00 per unit |
| Surface preparation tools | Needle scalers, rotary grinders, scraping tools, sand blasters | Steel + electric / pneumatic motors | USD 35-450 per tool |
| Painting equipment | Airless spray pumps, hose, guns, mixing buckets | Various | USD 65-1,200 per item |
| Lifesaving equipment (non-classed) | Lifelines, throwing rings, retro-reflective tape, signal flags | Polyester, polyethylene, retro-reflective film | USD 4.50-65.00 per unit |
| Hatch hardware | Hatch handles, latches, hinges, gaskets, dogging bolts | Stainless 316, cast bronze | USD 8.50-180.00 per unit |
| Cabin hardware | Door handles, locks, ports/portlights, cleats, hooks | Stainless 316, brass, marine-grade aluminum | USD 2.50-95.00 per unit |
Material selection — corrosion resistance hierarchy
Generic stainless 304 hardware that looks identical to marine-grade 316 is widely sold and cheap. The functional difference is real and important: 304 contains ~18% chromium / 8% nickel / no molybdenum; 316 contains ~16% chromium / 10% nickel / 2-3% molybdenum. Molybdenum dramatically improves chloride (saltwater) corrosion resistance. In submerged saltwater service, 304 hardware develops pitting corrosion and crevice corrosion within 12-24 months; 316 typically lasts 10-20+ years.
For any submerged or splash-zone marine application, specify 316 explicitly and verify with material test certificate. Suppliers who can provide actual mill test certificates per AISI 316 specification (with chemical analysis showing ≥2% Mo) deliver verifiably correct material; suppliers offering "marine-grade stainless" without explicit grade specification often deliver 304 sold at 316 prices.
| Material | Marine corrosion resistance | Typical applications | Cost relative to brass baseline |
|---|---|---|---|
| Stainless 316 / 316L | Excellent — preferred above-waterline marine | Deck hardware, hatches, pipe fittings, exposed fasteners | 120-180% (more expensive) |
| Stainless 304 | Good — adequate for splash-zone, NOT submerged | Above-deck hardware, non-submerged applications only | 80-110% (cheaper than 316) |
| Bronze (silicon, manganese) | Excellent — preferred submerged marine | Through-hull fittings, sea cocks, propeller hardware | 140-220% (most expensive) |
| Brass (lead-free recommended) | Good — splash zone, freshwater marine | Above-waterline pipe fittings, valves, deck plugs | 100% (baseline) |
| Hot-dip galvanized steel | Moderate — coating-dependent (5-15 years typical) | Mooring fittings, large hardware where bronze cost prohibitive | 40-60% (much cheaper) |
| Aluminum (marine grade 6061 / 5083) | Good with anodic protection | Cabin hardware, ports, lightweight deck items | 70-95% |
| Cast iron (painted) | Poor without coating maintenance | Engine room, internal hardware, bilge fittings | 30-50% |
| Plastic (UV-stabilized HDPE/Acetal) | Excellent — but limited mechanical strength | Cleats (small craft), pipe fittings (low-pressure) | 30-60% |
Mooring and anchor hardware — load ratings
| Hardware | Working Load Limit (WLL) | Safety factor | Common sizes (vessel size) |
|---|---|---|---|
| Cleat | WLL = SWL of mooring line; verify line / cleat compatibility | Cleat typically 4-5x of stamped capacity | 200-400mm length for vessels 8-24m; 600-1000mm for larger |
| Bollard | WLL stamped on bollard; typically matches mooring system | 5x typical | Vessel-specific; classed designs for commercial |
| Shackle (anchor / mooring) | WLL stamped, typically 0.5-50 tonnes | 4-6x for working shackles | Match anchor chain size; oversize 1 grade for safety margin |
| Swivel | WLL stamped | 5x typical | Anchor system specific |
| Padeye / eyebolt | WLL stamped, varies by application | 3-5x typical | Verify backing plate stronger than eyebolt |
Common buyer profiles
| Buyer type | Typical order pattern | Critical specifications |
|---|---|---|
| Shipyard (newbuild / refit) | Project-based: 50-200 SKUs per project, 100-2000 pcs each | Material certs, classification society compliance for classed items |
| Marine equipment dealer (regional) | Continuous: stock-and-replenish across 200-500 SKUs | Catalog breadth, fast delivery, branded packaging |
| Ship operator (fleet maintenance) | Annual: refresh inventory + spare parts kits | Repeatability — same supplier across fleet for spare parts compatibility |
| Yacht / recreational marine retailer | Seasonal: spring buildup + ongoing | Aesthetic finish, stainless 316 specification, packaging quality |
| Commercial fishing operator | Annual: replacement consumables + critical-failure spare parts | Salt-water service life, easy installation by crew |
| Ferry / commercial passenger operator | Continuous: maintenance program | Class-society compliance for safety items, material traceability |
| Marina / harbor operator | Project-based: dock infrastructure + maintenance | Heavy-duty fixed mooring hardware, hot-dip galvanized for longevity |
| Marine construction / offshore service | Project-based: heavy-rig hardware + consumables | WLL-rated hardware with test certificates |
Classification society considerations
Practical implication: most non-classed hardware (deck plugs, pipe fittings for low pressure, cabin hardware, surface prep tools) can be sourced from non-class-approved suppliers like GY Marine at significant cost savings. Classed components (mooring hardware on commercial vessels, anchor systems, lifting hardware, pressure pipe fittings) require class-society-approved suppliers and component-specific test certification, and command 2-4x the price of non-classed equivalents.
| Component category | Class society approval typically required? | Class societies for marine |
|---|---|---|
| Mooring hardware (commercial vessels) | Yes for commercial; not for recreational | ABS, BV, DNV, LR, RINA, NK, KR, CCS, IRS |
| Anchor and chain | Yes — every link / shackle in chain typically marked | Same as above |
| Lifting / cargo hooks | Yes for cargo work | Same as above plus LSA-IMO for lifesaving |
| Through-hull fittings (sea cocks) | Often, for commercial vessels | Bronze quality + pressure rating required |
| Pipe fittings (low pressure, freshwater) | Generally not | Material specification adequate |
| Pipe fittings (high pressure / fuel / hydraulic) | Often, for high-pressure systems | Pressure test certificates required |
| Deck hardware (decorative / cabin) | Generally not | Material specification adequate |
| Lifesaving equipment | Yes — IMO/SOLAS certification required | Special certification beyond class society |
| Surface preparation tools | No (industrial workshop tools) | Manufacturer's standard specification |
Order workflow — marine hardware procurement
View the full supplier profile, certifications, contact details, and complete product catalogue.
GY Marine — Chinese specialist supplier of marine hardware and ship-equipment fittings. Deck plugs and drains (brass, bronze, stainless 316, rubber), pipe fittings (small bore, brass/bronze/stainless/copper), mooring hardware (bollards, cleats, fairleads, ring bolts), anchor fittings (shackles, swivels, kenter shackles), deck hardware (padeyes, eye bolts, U-bolts, lashing rings), ventilation fittings (cowl ventilators, mushroom vents, deck collars), hose fittings (camlock, BSP/NPT), surface preparation tools (needle scalers, rotary grinders), painting equipment, hatch and cabin hardware, lifesaving equipment (non-classed). Material certificates available per AISI 316 specification and other standards.
- Application analysis — separate non-classed items (sourceable from any quality supplier) from classed items (requires class-society-approved suppliers); understand any local flag-state requirements
- Material specification — for any saltwater-exposed item, specify 316 stainless or bronze explicitly; for above-deck and freshwater, brass and 304 are acceptable; for galvanized items, specify hot-dip (better than electroplated)
- Quality verification — request mill test certificates for stainless and bronze parts; check material composition matches stated grade; for load-rated items, verify WLL stamp and test certificate
- Sample order — 1-3 pieces of each candidate SKU by air freight; verify fitment, material quality, finish
- First container order — typically 50-300 SKUs, 5-50 pieces per SKU based on consumption forecast; mix container loading allows broad catalog coverage at first-container scale
- Series replenishment — quarterly air freight for fast-moving items (deck plugs, pipe fittings, drain stoppers); annual or bi-annual sea freight for full inventory refresh
Frequently asked questions
Companion guide for marine hydraulic spares — pumps, motors, valves for ship operators and shipyards.
Real Norwegian marine buyer's deck crane refurb BOM — companion to marine procurement guides.
Companion guide for marine engine filtration — fuel-water separators, marine engine filters.
Source: Product images on this page are hosted on the manufacturer's official website (gymarine.com) and link directly back to that website. All product information was summarised from the supplier's public catalogue.
Classification society and regulatory caution: Marine hardware regulatory requirements vary significantly by vessel type, flag state, and component category. Commercial vessels operating internationally typically require classification society approval (ABS, BV, DNV, LR, NK, CCS, IRS, KR) for safety-critical hardware. Recreational vessels operate under different regulatory regimes that vary by country. Some hardware (lifesaving, navigation, lifting) requires IMO/SOLAS certification beyond class society. Verify all destination-vessel and -market regulations before commercial procurement. Bypassing legitimate class society requirements can result in vessel detention, insurance void, and crew safety risks.
Material specification responsibility: Material grade specification is critical for marine hardware corrosion resistance. Stainless 304 vs 316 differs significantly in saltwater service. Buyer is responsible for specifying correct material for application. Reputable suppliers can provide mill test certificates per specified material grade; unspecified or "marine-grade" terminology without explicit grade is insufficient for critical applications. For all submerged or splash-zone applications, specify 316 stainless or bronze explicitly with verifiable material certificate.
Pricing & specifications: All price ranges, service-life figures, and tier definitions reflect general market observation. Real-world marine hardware service life depends significantly on water salinity, temperature, dissolved oxygen, biological activity, and maintenance routine. Confirm current pricing, MOQ, lead time, and configuration directly with the supplier.
No middleman role: CifyChina provides supplier discovery and editorial content. All transactions occur directly between buyer and supplier through the contact channels published on the supplier's official website.
Verified China manufacturer + B2B supplier directory. 601 supplier profiles across 26 industries. Real buyer inquiries. Real product guides for international procurement.
- ⚙️ Industrial Machinery
- 👕 Apparel + Textile
- 🏡 Home + Kitchen
- MacGregor Crane (Norway)
- HVAC Parts (Brazil)
- Cayenne Parts (Qatar)
- Paper Bag Machine (Tanzania)
- E-Motorcycles (USA)
- Volvo S80 Suspension (DRC)
- Diesel Engine (DRC)
- → Browse all inquiries
- Hydraulic Piston Pumps
- Marine Hydraulics
- LC1D AC Contactors
- Diesel Filter Cross-Ref
- KRA Aftermarket Auto Parts
Have a similar requirement? Send the spec or drawing on WhatsApp and we will match it against the 591 suppliers in the directory.