Swiss Turning
Sliding head turning for long slender parts and small diameter work that has to hold its tolerance along the whole length.
- ServiceSwiss Turning
- EquipmentCITIZEN
- Works fromYour drawing
- Quality systemISO 9001:2015
Or email [email protected] and call +86-760-22822128.
Overview
Swiss turning holds the bar close to the cutting tool through a guide bushing, so the unsupported length stays short no matter how long the part is. That is what keeps deflection and chatter down on small diameter shafts, pins, connectors and nozzle bodies. At HPM the Swiss turning cell runs CITIZEN machines and the parts are made to whatever the drawing specifies.
Key Benefits
Long Slender Parts Without Deflection
The guide bushing supports the bar right at the cut, so length to diameter ratios that would chatter on a conventional lathe stay stable.
Turning And Secondary Features In One Setup
Cross drilling, slotting and back working happen while the part is still in the machine, which removes the re-fixturing that normally introduces error.
Made To Your Drawing
We do not sell a catalogue part. You send the drawing and we machine the material grade, the dimensions and the treatment it specifies.
Who It Is For
- Buyers of small diameter shafts, pins and spindles
- Connector and nozzle manufacturers
- Companies moving a part from a conventional lathe because it will not hold tolerance
- Engineers who need turning and cross features without a second operation
Problems It Solves
- Long thin parts that deflect and chatter on a conventional lathe.
- Tolerance lost every time a part is re-clamped for a secondary operation.
- Suppliers who quote from a catalogue instead of from your drawing.
Applications
- Small diameter shafts and pins
- Connector bodies
- Nozzle bodies
- Precision sleeves and bushings
Equipment
| Production route | Swiss Turning |
|---|---|
| Equipment brand | CITIZEN |
| Works from | Your drawing |
| Material | The grade and chemical composition your drawing specifies |
| Dimension | Within the tolerance your drawing specifies |
| Treatment | To the standard your drawing specifies |
| Quality system | ISO 9001:2015 certified |
High-end equipment is the basic factor to produce high-quality products. Both the production equipment and the inspection devices are famous brands.
Quality Control On This Route
The quality concept is the core and the most important factor behind the level of precision machining service HPM can offer.
- Material The grade and the chemical composition must comply with what the drawing requires.
- Dimension Every dimension must comply with the tolerance the drawing specifies.
- Treatment Every treatment must comply with the standard the drawing specifies.
HPM is an ISO 9001:2015 quality management system certified factory.
How To Order
From Drawing To Delivery
- 1
Email your drawing to in PDF, DWG or STEP. The mailbox is checked for quotations 24 hours.
- 2
Tell us the quantity, the material grade, the tolerance that matters and any surface or heat treatment the drawing calls for.
- 3
We review the drawing against our equipment and come back with the price and the lead time.
- 4
On approval we machine a first article and check it on material, dimension and treatment before the run starts.
- 5
The run is produced, inspected in the measuring room and shipped, with treatment handled inside the same order.
Related Services
CNC Turning
Turned parts made to drawing, from single prototypes through to repeat production runs.
View Service →
CNC Milling
Milled blocks, plates, manifolds and profiled components machined to your drawing.
View Service →
Grinding
Grinding as the finishing step where a turned or milled surface alone will not meet the drawing.
View Service →
Wire Cut
Precision wire cutting for profiles, hardened material and features a cutter cannot reach.
View Service →Swiss Turning FAQ
Do You Quote Swiss Turning From A Drawing
Yes. Send the drawing with the quantity and any treatment requirement and we come back with the price and the lead time. We do not machine to a standard house specification.
Can This Be Combined With Other Operations
Yes. HPM offers turn-key services, so this operation can be combined with turning, milling, wire cut, grinding, plating, anodizing, painting, hardening, carburization and nitriding inside one order.
What Is Checked Before The Parts Ship
Three things, all against your drawing: the material grade and chemical composition, every dimension against its tolerance, and the treatment against its standard.
Is The Factory Certified
HPM is an ISO 9001:2015 quality management system certified factory.
Get A Quotation On Swiss Turning
Email the drawing, the quantity and the treatment requirement. We answer with the price and the lead time.