CNC Turning
Turned parts made to drawing, from single prototypes through to repeat production runs.
- ServiceCNC Turning
- EquipmentMAKINO
- Works fromYour drawing
- Quality systemISO 9001:2015
Or email [email protected] and call +86-760-22822128.
Overview
CNC turning is the workhorse of the shop for round parts: discs, flanges, housings, sleeves and stepped shafts. The NC turning cell at HPM runs MAKINO equipment. Whatever the geometry, the material grade, the dimensional tolerance and the surface treatment all come from your drawing rather than from a standard house specification.
Key Benefits
Repeatable Across The Whole Run
Once the program and the tooling are proven on the first article, part number one and part number one thousand come off the same way.
Round Geometry Done Efficiently
Discs, flanges, sleeves and stepped shafts are far quicker and more accurate turned than milled, which shows up directly in the piece price.
Feeds Straight Into Milling And Treatment
Turning, milling, wire cut, plating and heat treatment are handled as one turn-key route, so you deal with one supplier instead of coordinating four.
Who It Is For
- Buyers of turned discs, flanges, sleeves and housings
- Companies consolidating several machining suppliers into one
- Engineers who need a first article before committing to a production run
Problems It Solves
- Round parts quoted at milling prices because the supplier has no turning capacity.
- Drift between the first article and the production run.
- Turning, milling and treatment split across separate vendors, with the tolerance stack landing on you.
Applications
- Discs and flanges
- Sleeves and bushings
- Stepped shafts
- Valve and pump bodies
Equipment
| Production route | CNC Turning |
|---|---|
| Equipment brand | MAKINO |
| Works from | Your drawing |
| Material | The grade and chemical composition your drawing specifies |
| Dimension | Within the tolerance your drawing specifies |
| Treatment | To the standard your drawing specifies |
| Quality system | ISO 9001:2015 certified |
High-end equipment is the basic factor to produce high-quality products. Both the production equipment and the inspection devices are famous brands.
Quality Control On This Route
The quality concept is the core and the most important factor behind the level of precision machining service HPM can offer.
- Material The grade and the chemical composition must comply with what the drawing requires.
- Dimension Every dimension must comply with the tolerance the drawing specifies.
- Treatment Every treatment must comply with the standard the drawing specifies.
HPM is an ISO 9001:2015 quality management system certified factory.
How To Order
From Drawing To Delivery
- 1
Email your drawing to in PDF, DWG or STEP. The mailbox is checked for quotations 24 hours.
- 2
Tell us the quantity, the material grade, the tolerance that matters and any surface or heat treatment the drawing calls for.
- 3
We review the drawing against our equipment and come back with the price and the lead time.
- 4
On approval we machine a first article and check it on material, dimension and treatment before the run starts.
- 5
The run is produced, inspected in the measuring room and shipped, with treatment handled inside the same order.
Related Services
Swiss Turning
Sliding head turning for long slender parts and small diameter work that has to hold its tolerance along the whole length.
View Service →
CNC Milling
Milled blocks, plates, manifolds and profiled components machined to your drawing.
View Service →
Grinding
Grinding as the finishing step where a turned or milled surface alone will not meet the drawing.
View Service →
Wire Cut
Precision wire cutting for profiles, hardened material and features a cutter cannot reach.
View Service →CNC Turning FAQ
Do You Quote CNC Turning From A Drawing
Yes. Send the drawing with the quantity and any treatment requirement and we come back with the price and the lead time. We do not machine to a standard house specification.
Can This Be Combined With Other Operations
Yes. HPM offers turn-key services, so this operation can be combined with turning, milling, wire cut, grinding, plating, anodizing, painting, hardening, carburization and nitriding inside one order.
What Is Checked Before The Parts Ship
Three things, all against your drawing: the material grade and chemical composition, every dimension against its tolerance, and the treatment against its standard.
Is The Factory Certified
HPM is an ISO 9001:2015 quality management system certified factory.
Get A Quotation On CNC Turning
Email the drawing, the quantity and the treatment requirement. We answer with the price and the lead time.