CNC Milling
Milled blocks, plates, manifolds and profiled components machined to your drawing.
- ServiceCNC Milling
- EquipmentBROTHER
- Works fromYour drawing
- Quality systemISO 9001:2015
Or email [email protected] and call +86-760-22822128.
Overview
The milling cell at HPM runs BROTHER machining centres. Milling covers everything that is not a body of revolution: blocks, plates, manifolds, brackets, hole patterns and profiled faces. It is also the process behind the ultra-small hole work, since holes under 1 mm are produced by milling rather than by conventional drilling.
Key Benefits
Complex Features In One Setup
Pockets, hole patterns, faces and profiles are cut in the same fixturing, which keeps the relationship between features tighter than a multi-machine route.
The Route Behind Micro Holes
Our ultra-small hole drilling is a milling operation, so holes down to 0.05 mm are produced on this cell rather than sent out.
Plates And Manifolds With Dense Hole Patterns
Multi hole plates and manifold blocks are routine work here, including parts where every hole has its own tolerance callout.
Who It Is For
- Buyers of manifold blocks, plates and brackets
- Nozzle and fluid component manufacturers
- Engineers with parts that combine profiles and dense hole patterns
Problems It Solves
- Feature to feature position lost across multiple setups.
- Small holes quoted as a separate outsourced operation.
- Suppliers who can mill a profile but not hold the hole pattern.
Applications
- Manifold blocks
- Multi hole plates
- Brackets and housings
- Profiled components
Equipment
| Production route | CNC Milling |
|---|---|
| Equipment brand | BROTHER |
| Works from | Your drawing |
| Material | The grade and chemical composition your drawing specifies |
| Dimension | Within the tolerance your drawing specifies |
| Treatment | To the standard your drawing specifies |
| Quality system | ISO 9001:2015 certified |
High-end equipment is the basic factor to produce high-quality products. Both the production equipment and the inspection devices are famous brands.
Quality Control On This Route
The quality concept is the core and the most important factor behind the level of precision machining service HPM can offer.
- Material The grade and the chemical composition must comply with what the drawing requires.
- Dimension Every dimension must comply with the tolerance the drawing specifies.
- Treatment Every treatment must comply with the standard the drawing specifies.
HPM is an ISO 9001:2015 quality management system certified factory.
How To Order
From Drawing To Delivery
- 1
Email your drawing to in PDF, DWG or STEP. The mailbox is checked for quotations 24 hours.
- 2
Tell us the quantity, the material grade, the tolerance that matters and any surface or heat treatment the drawing calls for.
- 3
We review the drawing against our equipment and come back with the price and the lead time.
- 4
On approval we machine a first article and check it on material, dimension and treatment before the run starts.
- 5
The run is produced, inspected in the measuring room and shipped, with treatment handled inside the same order.
Related Services
Swiss Turning
Sliding head turning for long slender parts and small diameter work that has to hold its tolerance along the whole length.
View Service →
CNC Turning
Turned parts made to drawing, from single prototypes through to repeat production runs.
View Service →
Grinding
Grinding as the finishing step where a turned or milled surface alone will not meet the drawing.
View Service →
Wire Cut
Precision wire cutting for profiles, hardened material and features a cutter cannot reach.
View Service →CNC Milling FAQ
Do You Quote CNC Milling From A Drawing
Yes. Send the drawing with the quantity and any treatment requirement and we come back with the price and the lead time. We do not machine to a standard house specification.
Can This Be Combined With Other Operations
Yes. HPM offers turn-key services, so this operation can be combined with turning, milling, wire cut, grinding, plating, anodizing, painting, hardening, carburization and nitriding inside one order.
What Is Checked Before The Parts Ship
Three things, all against your drawing: the material grade and chemical composition, every dimension against its tolerance, and the treatment against its standard.
Is The Factory Certified
HPM is an ISO 9001:2015 quality management system certified factory.
Get A Quotation On CNC Milling
Email the drawing, the quantity and the treatment requirement. We answer with the price and the lead time.