The 7 Inch Acrylic Roller Set 18mm Nap is built with a thermofused acrylic pile fabric fitted to a push-in frame with a green plastic handle. An 18 mm long pile holds and releases high volumes of coating on rough or textured substrates without delaminating in paint solvents. Supplied as a roller or paired with a matching paint tray, this set gives distributors and retail buying groups a dependable decorating line ready to quote for container shipment.
The thermofused manufacturing process fuses the acrylic pile directly to the inner sleeve, stopping adhesive breakdown during solvent use.
The long pile length holds paint deep in the fabric, getting into crevices on masonry and textured walls with fewer reloads.
The push in mounting setup allows decorators to slide roller sleeves on and off the frame smoothly without specialty tools.
Applying heavy masonry paint or exterior emulsion across rough stucco, brick, and pebbledash surfaces.
Displaying ready-to-use roller and tray combinations on retail shelves for DIY home renovation buyers.
Handling broad surface coverage on new builds where contractors need maximum paint pickup per pass.
| Product reference | FT-PR-701 |
|---|---|
| Product type | Paint roller set |
| Working width | 7 inch |
| Nap length | 18 mm |
| Pile material | Acrylic fibre |
| Pile attachment | Thermofused |
| Frame mount | Push in |
| Handle | Green plastic |
| Range | Paint Tools |
Packaging formats, tray inclusions, master carton quantities and branding specifications are confirmed in writing at quotation based on your programme requirements.
Our manufacturing process follows controlled production stages to keep sleeves, frames, and packaging aligned across every order.
The 18 mm acrylic pile is thermofused directly onto the core sleeve using heat, eliminating adhesive lines.
Sleeves are cut to exact 7 inch working dimensions and inspected for clean end trimming.
Steel wire arms are fitted with the green plastic handle and checked for secure push in engagement.
Rollers are sleeved or packed together with black plastic paint trays according to client pack specifications.
| Alternative | How This Product Compares |
|---|---|
| Short nap roller sleeves | Short nap covers produce a smoother finish on flat plaster, but an 18 mm pile is necessary to fill rough texture and masonry. |
| Adhesive bonded roller covers | Glued sleeves risk fabric detachment when cleaned with paint thinners, whereas thermofused acrylic holds firmly under solvents. |
| American cage roller frames | Cage systems use hollow core covers, whereas this push in frame fits standard European style cylindrical push in sleeves. |
Rinse or dampen the 18 mm acrylic sleeve lightly and spin dry to remove any loose production fibres.
Roll the sleeve through the ribbed section of the paint tray to distribute paint thoroughly across the deep nap.
Apply coatings using steady W-pattern passes, then lay off in a single direction to distribute paint into wall textures.
Wash out residual coating thoroughly after use and store the sleeve upright to preserve the 18 mm pile shape.
Complete 7 inch thermofused acrylic paint roller with threaded frame and two-tone grip.
View product
Complete 9 inch acrylic roller set with yellow tiger stripe cover and threaded chrome frame.
View product
Thermofused acrylic European roller set with rounded end and yellow cap.
View product
Assembled paint roller set with blue plastic handle and striped fabric cover.
View product
The two frame systems are not interchangeable. Fix this before you sample.
Read more
Heat bonding removes the adhesive seam that fails when a cover is washed.
Read more
Match nap to the surface and the paint system before you argue about price.
Read moreThe set includes the 7 inch push in acrylic roller with a green plastic handle, and can be supplied with a black plastic paint tray as shown in our catalogue.
An 18 mm nap is designed for rough, semi-rough, and exterior textured surfaces; smoother finishes generally require a shorter nap depth.
Minimum order quantities depend on whether you require individual rollers, boxed tray sets, or custom packaging, and are agreed in writing at quotation.
Yes, we can produce private label sleeves, hang cards, barcodes, and branded cartons based on your artwork requirements.
Yes, importers frequently combine roller sets, brushes, PPE, and outdoor lines from our Foshan facility into shared container shipments.
We produce and supply physical samples for your inspection and written approval before mass production and packing commence.
Contact our export sales team with your target pack configuration, tray requirements, and estimated volume to receive a written quotation and product samples.
