1.2kV 160A Transformer Bushing Insulator

• Home
• Products
• Screw Thread Transformer Bushings
• 1.2kV 160A Transformer Bushing Insulator

Product Overview

A 1.2 kV low voltage transformer bushing rated 160 A, in the screw thread family. It sits at the lower end of the ANSI low voltage range, which is built from wet process porcelain with NBR gaskets, a copper threaded rod, a blued steel spin grip nut, a zinc-plated brass connector and stainless steel lock washer and nut, in light grey glaze.

Why Buyers Choose This Part

• 160 A rating for smaller low voltage terminal connections
• Same hardware set as the rest of the ANSI low voltage family
• Light grey glaze consistent across the LV range
• Made to customer design where the catalogue rating does not fit

Where It Is Used

• Low voltage terminals on small distribution transformers
• Auxiliary LV connections at modest current
• Replacement on ANSI pattern terminal boards
• Orders combining several LV ratings from one family

Who It Suits

• Distribution transformer manufacturers
• Repair workshops handling small transformers
• Distributors supplying LV bushings by current rating

What Goes Wrong Without The Right Part

• Over-specified higher current bushings on small terminals
• Hardware sets that differ between suppliers across one terminal board
• Glaze colour inconsistency across an LV range
• Sourcing a specific low current rating

How It Is Built

• 1.2 kV at 160 A
• Screw thread transformer bushing construction
• Wet process porcelain insulator
• Light grey glaze
• NBR gaskets and stainless steel fasteners
• ANSI low voltage family

Materials

• Wet process porcelain
• Copper threaded rod
• NBR gaskets
• Zinc-plated brass connector
• Stainless steel fasteners

Process

• Forming
• Glazing
• Firing
• Rod machining
• Hardware assembly
• Routine test

Testing

• Thread gauge check on the rod
• Gasket seating inspection
• Routine electrical test at the 1.2 kV class

Certification

• ANSI low voltage family
• ISO 9001 quality management system

Customisation Options

• Connector size and type from the ANSI LV table
• Other ratings from 125 A to 1250 A
• Customers' designs accepted

How It Compares

1.2 kV 400A bushing	The 400 A version carries roughly two and a half times the current on a larger conductor path. Match the bushing to the LV output current.
1.2 kV 125A bushing	The 125 A entry in the ANSI table uses a 3/8 inch by 16 thread. The 160 A rating sits just above it, so confirm the connector before ordering.

Before You Order And After It Arrives

• Confirm the 160 A rating covers your continuous LV current
• Specify the connector size and type with the order
• Replace gaskets at every removal
• Ask for the drawing before a first order

1.2kV 160A Transformer Bushing Insulator Questions

Related Products

Screw Thread Transformer Bushings

Threaded ANSI 18kV Transformer Bushing ANSI-18/50

High Voltage Transformer Bushings

• Overall Height H 541 mm
• Creep Distance 480 mm
• Weight 3.5 kg

18kV 25A HV ANSI Transformer Bushing

Screw Thread Transformer Bushings

• Creep Distance 480 mm
• Weight 3.5 kg

1.2kV 400A Screw Thread Transformer Bushing

Screw Thread Transformer Bushings

Threaded 1kV LV ANSI Transformer Bushing 30kV BIL

• Rated Voltage 1 kV
• BIL 30 kV

Related Cases Guides And Applications

DIN EN And ANSI Transformer Bushing Standards Explained

Transformer Bushing Selection A Guide For Engineers

What Is A High Voltage Transformer Insulator

Distribution Transformer Manufacturers

Power Utilities And Substations

Manufacturing To Your Drawing Or Sample

Selecting Creepage For The Pollution At Your Site

Quote For 1.2kV 160A Transformer Bushing Insulator

Send the quantity and any drawing you have. Enquiries are answered within 24 hours, and we produce to customer drawings and samples.