Cummins KT19-M425 336KW 425HP Marine Diesel Engine
Cummins KT19-M425 6-cylinder in-line diesel engine of 19 L delivering 317 kW (425 HP) at 1800 rpm used for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges.
- Home
- Products
- Marine Engines
- Cummins KT19-M425 336KW 425HP Marine Diesel Engine
What This Engine Is Built For
Cummins KT19-M425: a 6-cylinder in-line marine diesel engine displacing 19 L on a 159 * 159 mm bore and stroke, supplied complete by MEP Power. It is rated at 317 kW (425 HP) at 1800 rpm and develops 1851 N.m @ 1500 rpm. The engine is turbocharged, with a Cummins Pressure Time (PT Pump) fuel system. It carries CCS/IMO Certificates. Typical duty is propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges; dry weight with flywheel and alternator is 1815 Kg and the overall envelope is 1666mm*874mm*1377mm.
Key Benefits
- Delivers 317 kW (425 HP) at 1800 rpm from 19 L as a factory-rated assembly.
- Peak torque of 1851 N.m @ 1500 rpm holds the load without downshifting or derating.
- Turbocharged induction keeps charge temperature under control in continuous duty.
- Supplied to CCS/IMO Certificates, so the unit can be registered in markets that require it.
- Dry weight 1815 Kg and envelope 1666mm*874mm*1377mm are published so the installation can be checked before ordering.
- Published fuel consumption of 79 L/hr makes running cost predictable.
Application Scenarios
- Main propulsion in a steel workboat
- Auxiliary and deck machinery drive
- Fishing vessel repower
- Harbour tug and pilot boat service
Who It Is For
- Shipyards repowering workboats and fishing vessels
- Boat owners replacing a worn main engine without changing the engine bed
- Marine service yards that keep exchange engines on the shelf
- Fleet operators standardising on one Cummins family across several hulls
Problems It Solves
- A vessel out of service earns nothing, and a mismatched replacement engine means new mounts, new couplings and weeks of yard time.
- Marine duty punishes engines that were never cooled for sea water service.
- Spare parts for grey-import engines are hard to identify years later.
- Identifying the right KT19-M425 variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Model | KT19-M425 |
| Type | 6 Cylinders in Line, 4 strokes |
| Displacement | 19 L |
| Bore x Stroke | 159 * 159 |
| Net Weight (with flywheel and alternator) | 1815 Kg |
| Overall Dimension | 1666mm*874mm*1377mm |
| Rated Power/Speed | 317 kW/425HP |
| Rated Speed | 1800 rpm |
| Rating Type | Continuous Running Power |
| Max Torque/Speed | 1851 N.m @ 1500 rpm |
| Low Idle Speed | 675-725 rpm |
| High Idle Speed | 2050-2106 rpm |
| Fuel Consumption (running speed) | 79 L/hr |
| Certification | CCS/IMO Certificates |
| Aspiration | Turbocharged |
| Fuel System | Cummins Pressure Time (PT Pump) |
| Starting System | Electrical Start (24V) |
| Governor Type | Mechanical Control |
| Compression Ratio | 15.5:1 |
| Lowest Starting Temp (without auxiliary system) | -12℃ |
| Rated Power | 317 kW (425HP) |
| Cylinders | 6 Cylinders in-line |
| Prime Power | 317 kW/425HP |
Technical Features
- Cylinders: 6 Cylinders in Line, 4 strokes
- Displacement: 19 L
- Bore and stroke: 159 * 159
- Aspiration: Turbocharged
- Fuel system: Cummins Pressure Time (PT Pump)
- Governor: Mechanical Control
- Starting system: Electrical Start (24V)
- Compression ratio: 15.5:1
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model KT19-M425 when ordering so the correct variant is supplied.
- Check the gearbox reduction ratio and propeller match before ordering
- Confirm raw-water or keel cooling to suit the hull
- Commission with the exhaust system and sea water pump connected as supplied
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 317 kW (425 HP) on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same KT19 range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
KT19-M425 Questions
Is this KT19-M425 a genuine Cummins engine
What power does the KT19-M425 produce
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One
Cummins MTAA11 282KW 380HP Marine Diesel Engine
Cummins MTAA11 6-cylinder in-line diesel engine rated 380 HP at 1500rmp with 10.8 L displacement for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges.
View specification
Cummins MTAA11 234KW 315HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins MTAA11 at 315 HP at 1500rmp from 10.8 L.
View specification
Cummins MTAA11 224KW 300HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins MTAA11 at 300 HP at 1500rmp from 10.8 L.
View specificationWhere It Is Used
Quote The KT19-M425
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.