Cummins 6LTAA8.9-GM215 215KW 288HP Marine Diesel Engine
Cummins 6LTAA8.9-GM215 6-cylinder in-line diesel engine rated 215 kW (288 HP) at 1800 rpm with 8.9 L displacement for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges.
- Home
- Products
- Marine Engines
- Cummins 6LTAA8.9-GM215 215KW 288HP Marine Diesel Engine
What This Engine Is Built For
The Cummins 6LTAA8.9-GM215 is a 6-cylinder in-line marine diesel engine of 8.9 L with a 114 * 145 mm bore and stroke supplied by MEP Power as a complete assembly. It is rated at 215 kW (288 HP) at 1800 rpm. The engine is turbocharged/charge air cooled and water cooled, with a Bosch P7100 Pump/RQV-K Governor fuel system. It is built at the Dongfeng Cummins Plant 6LTAA8.9-GM215 and carries CCS/IMO Certificates. Typical duty is propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges; dry weight with flywheel and alternator is 650 Kg and the overall envelope is 1149mm*799mm*1022mm.
Key Benefits
- Delivers 215 kW (288 HP) at 1800 rpm from 8.9 L as a factory-rated assembly.
- Turbocharged/Charge Air Cooled induction with water cooling keeps charge temperature under control in continuous duty.
- Supplied to CCS/IMO Certificates, so the unit can be registered in markets that require it.
- Dry weight 650 Kg and envelope 1149mm*799mm*1022mm are published so the installation can be checked before ordering.
- Published fuel consumption of ≤ 245 g/kW.hr 6LTAA8.9-GM215 makes running cost predictable.
- Starts without auxiliary aids down to -12℃.
Application Scenarios
- Main propulsion in a steel workboat
- Auxiliary and deck machinery drive
- Fishing vessel repower
- Harbour tug and pilot boat service
Who It Is For
- Shipyards repowering workboats and fishing vessels
- Boat owners replacing a worn main engine without changing the engine bed
- Marine service yards that keep exchange engines on the shelf
- Fleet operators standardising on one Cummins family across several hulls
Problems It Solves
- A vessel out of service earns nothing, and a mismatched replacement engine means new mounts, new couplings and weeks of yard time.
- Marine duty punishes engines that were never cooled for sea water service.
- Spare parts for grey-import engines are hard to identify years later.
- Identifying the right 6LTAA8.9-GM215 variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Model | 6LTAA8.9-GM215 |
| Type | 6 Cylinders in Line |
| Displacement | 8.9 L |
| Bore x Stroke | 114 * 145 |
| Net Weight (with flywheel and alternator) | 650 Kg |
| Overall Dimension | 1149mm*799mm*1022mm |
| Engine Configuration Number | D563014MX03 |
| Manufacturing Plant | Dongfeng Cummins Plant 6LTAA8.9-GM215 |
| Rated Power/Speed | 215 kW/288HP @ 1800 rpm |
| Standby Power | 237 kW/318HP @ 1800 rpm |
| Continuous Output/Speed | 175 kW/235HP @ 1500 rpm |
| Low Idle Speed | 650-750 rpm |
| Fuel Consumption (running speed) | ≤ 245 g/kW.hr 6LTAA8.9-GM215 |
| Certification | CCS/IMO Certificates |
| Aspiration | Turbocharged/Charge Air Cooled |
| Fuel System | Bosch P7100 Pump/RQV-K Governor |
| Compression Ratio | 16.6:1 Starting Method: Electrical/Air Start (12V/24V) |
| Lowest Starting Temp (without auxiliary system) | -12℃ |
| Engine Cooling Fluid Volume | 11.1 L |
| Firing Order | 1-5-3-6-2-4 |
| Cooling Method | Water Cooled |
| Rated Power | 215 kW (288HP) |
| Rated Speed | 1800 rpm |
| Cylinders | 6 Cylinders in-line |
| Prime Power | 215 kW/288HP |
Technical Features
- Cylinders: 6 Cylinders in Line
- Displacement: 8.9 L
- Bore and stroke: 114 * 145
- Aspiration: Turbocharged/Charge Air Cooled
- Fuel system: Bosch P7100 Pump/RQV-K Governor
- Compression ratio: 16.6:1 Starting Method: Electrical/Air Start (12V/24V)
- Firing order: 1-5-3-6-2-4
- Coolant capacity: 11.1 L
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model 6LTAA8.9-GM215 and the engine configuration number D563014MX03 when ordering so the correct variant is supplied.
- Check the gearbox reduction ratio and propeller match before ordering
- Confirm raw-water or keel cooling to suit the hull
- Commission with the exhaust system and sea water pump connected as supplied
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 215 kW (288 HP) on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same 6LTAA8.9 range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
6LTAA8.9-GM215 Questions
Is this 6LTAA8.9-GM215 a genuine Cummins engine
What power does the 6LTAA8.9-GM215 produce
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One
Cummins 6LTAA8.9 230KW 315HP Marine Diesel Engine
Cummins 6LTAA8.9 6-cylinder in-line diesel engine of 8.9 L delivering 230 kW (315 HP) at 253 kW/344HP @ 2200 rpm used for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges.
View specification
Cummins 6LTAA8.9 224KW 300HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins 6LTAA8.9 at 224 kW (300 HP) at 245 kW/328HP @ 1858 rpm from 8.9 L.
View specification
Cummins 6LTAA8.9-GM200 200KW 268HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins 6LTAA8.9-GM200 at 200 kW (268 HP) at 1500 rpm from 8.9 L.
View specificationWhere It Is Used
Quote The 6LTAA8.9-GM215
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.