Cummins NTA855 298KW 400HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins NTA855 at 298 kW (400 HP) at 1800/2100 rpm from 14 L.
- Home
- Products
- Marine Engines
- Cummins NTA855 298KW 400HP Marine Diesel Engine
What This Engine Is Built For
MEP Power supplies the Cummins NTA855 as a complete 6-cylinder in-line marine diesel engine of 14 L running a 140 * 152 mm bore and stroke. It is rated at 298 kW (400 HP) at 1800/2100 rpm. The engine is turbocharged/aftercooled, with a Cummins Pressure Time (PT Pump) fuel system. It is built at the Chongqing Cummins Plant and carries CCS/IMO Certificates. Typical duty is propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges; dry weight with flywheel and alternator is 1430 Kg and the overall envelope is 1809mm*881mm*1598mm.
Key Benefits
- Delivers 298 kW (400 HP) at 1800/2100 rpm from 14 L as a factory-rated assembly.
- Turbocharged/Aftercooled induction keeps charge temperature under control in continuous duty.
- Supplied to CCS/IMO Certificates, so the unit can be registered in markets that require it.
- Dry weight 1430 Kg and envelope 1809mm*881mm*1598mm are published so the installation can be checked before ordering.
- Published fuel consumption of ≤ 72 L/hr makes running cost predictable.
- Starts without auxiliary aids down to -12℃.
Application Scenarios
- Main propulsion in a steel workboat
- Auxiliary and deck machinery drive
- Fishing vessel repower
- Harbour tug and pilot boat service
Who It Is For
- Shipyards repowering workboats and fishing vessels
- Boat owners replacing a worn main engine without changing the engine bed
- Marine service yards that keep exchange engines on the shelf
- Fleet operators standardising on one Cummins family across several hulls
Problems It Solves
- A vessel out of service earns nothing, and a mismatched replacement engine means new mounts, new couplings and weeks of yard time.
- Marine duty punishes engines that were never cooled for sea water service.
- Spare parts for grey-import engines are hard to identify years later.
- Identifying the right NTA855 variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Model | Cummins NTA855 298KW 400HP Marine Diesel Engine |
| Type | 6 Cylinders in Line, 4 strokes |
| Displacement | 14 L |
| Bore x Stroke | 140 * 152 |
| Net Weight (with flywheel and alternator) | 1430 Kg |
| Overall Dimension | 1809mm*881mm*1598mm |
| Manufacturing Plant | Chongqing Cummins Plant |
| Engine Configuration Number | D0903348MX02 NTA855-M400 |
| Rated Power/Speed | 298 kW/400HP |
| Rated Speed | 1800/2100 rpm |
| Fuel Consumption (running speed) | ≤ 72 L/hr |
| Certification | CCS/IMO Certificates |
| Aspiration | Turbocharged/Aftercooled |
| Fuel System | Cummins Pressure Time (PT Pump) |
| Starting System | Electrical Start (24V/100AMP) |
| Governor Type | Mechanical Control |
| Compression Ratio | 14.5:1 |
| Lowest Starting Temp (without auxiliary system) | -12℃ |
| Cylinders | 6 Cylinders in-line |
| Prime Power | 261KW/350HP |
Technical Features
- Cylinders: 6 Cylinders in Line, 4 strokes
- Displacement: 14 L
- Bore and stroke: 140 * 152
- Aspiration: Turbocharged/Aftercooled
- Fuel system: Cummins Pressure Time (PT Pump)
- Governor: Mechanical Control
- Starting system: Electrical Start (24V/100AMP)
- Compression ratio: 14.5:1
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model NTA855 and the engine configuration number D0903348MX02 NTA855-M400 when ordering so the correct variant is supplied.
- Check the gearbox reduction ratio and propeller match before ordering
- Confirm raw-water or keel cooling to suit the hull
- Commission with the exhaust system and sea water pump connected as supplied
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 298 kW (400 HP) on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same NTA855 range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
NTA855 Questions
Is this NTA855 a genuine Cummins engine
What power does the NTA855 produce
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One
Cummins NTA855 336KW 450HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins NTA855 at 450 HP at 1800rmp from 14 L.
View specification
Cummins NTA855 261KW 350HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins NTA855 at 261 kW (350 HP) at 1800 rpm from 14 L.
View specification
Cummins NTA855 224KW 300HP Marine Diesel Engine
Cummins NTA855 6-cylinder in-line diesel engine rated 224 kW (300 HP) at 1800 rpm with 14 L displacement for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges.
View specificationWhere It Is Used
Quote The NTA855
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.