Cummins ISMe 226KW 308HP Vehicle Diesel Engine
6-cylinder in-line diesel engine for trucks, buses, coaches and municipal vehicles, supplied as the Cummins ISME at 226 kW (308 HP) at 1900 rpm from 10.8 L.
- Home
- Products
- Vehicle Engines
- Cummins ISMe 226KW 308HP Vehicle Diesel Engine
What This Engine Is Built For
MEP Power supplies the Cummins ISME as a complete 6-cylinder in-line vehicle diesel engine of 10.8 L running a 114 * 144.5 mm bore and stroke. It is rated at 226 kW (308 HP) at 1900 rpm and develops 1500 N.m @ 1000-1400 rpm. The engine is turbocharged & charge air cooled and water cooled, with a Cummins Fuel System/EMC876 fuel system. It is built at the Dongfeng Cummins Plant and carries Euro III. Typical duty is trucks, buses, coaches and municipal vehicles; dry weight with flywheel and alternator is 940 Kg and the overall envelope is 1135mm*825mm*1159mm.
Key Benefits
- Delivers 226 kW (308 HP) at 1900 rpm from 10.8 L as a factory-rated assembly.
- Peak torque of 1500 N.m @ 1000-1400 rpm holds the load without downshifting or derating.
- Turbocharged & Charge Air Cooled induction with water cooling keeps charge temperature under control in continuous duty.
- Supplied to Euro III, so the unit can be registered in markets that require it.
- Dry weight 940 Kg and envelope 1135mm*825mm*1159mm are published so the installation can be checked before ordering.
- Starts without auxiliary aids down to -10℃/-25℃.
Application Scenarios
- Heavy truck engine assembly replacement
- City bus and coach repower
- Mixer, tipper and refuse body chassis
- Light commercial vehicle conversion
Who It Is For
- Truck and bus fleets doing engine assembly swaps instead of in-frame rebuilds
- Body builders and chassis converters specifying a known driveline
- Workshops supporting Dongfeng and other Cummins-powered vehicles
- Municipal fleets running refuse, mixer and utility bodies
Problems It Solves
- In-frame rebuilds tie up a bay for days and still leave old ancillaries in service.
- Emission compliance has to be matched to the market the vehicle runs in.
- Mixed fleets with several engine families multiply the parts a workshop must carry.
- Identifying the right ISME variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Model | Cummins ISMe 226KW 308HP Vehicle Diesel Engine |
| Type | 6 Cylinders in Line |
| Displacement | 10.8 L |
| Bore x Stroke | 114 * 144.5 |
| Net Weight (with flywheel and alternator) | 940 Kg |
| Overall Dimension | 1135mm*825mm*1159mm |
| Manufacturing Plant | Dongfeng Cummins Plant |
| Rated Power/Speed | 226 kW/308HP |
| Rated Speed | 1900 rpm |
| Torque/Rated Speed | 1150 N.m @ 1900 rpm |
| Max Torque/Speed | 1500 N.m @ 1000-1400 rpm |
| Certification | Euro III |
| Aspiration | Turbocharged & Charge Air Cooled |
| Fuel System | Cummins Fuel System/EMC876 |
| Compression Ratio | 17.3:1 |
| Electrical System (starter motor/alternator) | 24V (750A) |
| Lowest Starting Temp (without auxiliary system) | -10℃/-25℃ |
| Firing Order | 1-5-3-6-2-4 |
| Cooling Method | Water Cooled |
| Cylinders | 6 Cylinders in-line |
| Prime Power | 226KW/308HP |
Technical Features
- Cylinders: 6 Cylinders in Line
- Displacement: 10.8 L
- Bore and stroke: 114 * 144.5
- Aspiration: Turbocharged & Charge Air Cooled
- Fuel system: Cummins Fuel System/EMC876
- Electrical system: 24V (750A)
- Compression ratio: 17.3:1
- Firing order: 1-5-3-6-2-4
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model ISME when ordering so the correct variant is supplied.
- Match the flywheel housing and clutch to the existing gearbox
- Check the emission level required in the registration market before ordering
- Re-use the vehicle's cooling pack only if it meets the engine's heat rejection
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 226 kW (308 HP) on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same ISME range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
Cummins ISMe 226KW 308HP Vehicle Diesel Engine Questions
Is this ISME a genuine Cummins engine
What power does the ISME produce
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One
Cummins ISME345-30 Diesel Engine 345HP Vehicle Engine Assembly
6-cylinder in-line diesel engine for trucks, buses, coaches and municipal vehicles, supplied as the Cummins ISME345-30 at 254 kW (345 HP) at 1900 rpm from 10.8 L.
View specification
Cummins ISME335-30 Diesel Engine 335HP Vehicle Engine Assembly
Cummins ISME335-30 6-cylinder in-line diesel engine of 10.8 L delivering 246 kW (335 HP) at 1900 rpm used for trucks, buses, coaches and municipal vehicles.
View specification
Cummins ISME308-30 Diesel Engine 308HP Vehicle Engine Assembly
6-cylinder in-line diesel engine for trucks, buses, coaches and municipal vehicles, supplied as the Cummins ISME308-30 at 226 kW (308 HP) at 1900 rpm from 10.8 L.
View specificationWhere It Is Used
Quote The Cummins ISMe 226KW 308HP Vehicle Diesel Engine
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.