Cummins QSK38 Generator Diesel Engine 1100kW Generator Engine Assembly
Cummins QSK38-G2 12-cylinder diesel engine rated 989 kW with 37.7 L displacement for prime and standby generator sets.
- Home
- Products
- Generator Engines
- Cummins QSK38 Generator Diesel Engine 1100kW Generator Engine Assembly
What This Engine Is Built For
The Cummins QSK38-G2 is a 12-cylinder generator drive diesel engine of 37.7 L with a 159 * 159 mm bore and stroke supplied by MEP Power as a complete assembly. It is rated at 989 kW. The engine is turbocharged, after-cooled, with a Cummins Direct Injection MCRS fuel system. It is built at the Chongqing Cummins Plant. Typical duty is prime and standby generator sets; dry weight with flywheel and alternator is 3825 Kg and the overall envelope is 2081mm*1492mm*1866mm.
Key Benefits
- Delivers 989 kW from 37.7 L as a factory-rated assembly.
- Turbocharged, After-cooled induction keeps charge temperature under control in continuous duty.
- Dry weight 3825 Kg and envelope 2081mm*1492mm*1866mm are published so the installation can be checked before ordering.
- Published fuel consumption of 62.0 g/kWh makes running cost predictable.
- Built on the QSK38 platform, a Cummins family with parts availability worldwide
- Shipped from Shiyan, Hubei, China with export packing and full documentation
Application Scenarios
- Prime mover for a new generator set build
- Standby set engine replacement
- Rental power fleet rebuild
- Containerised power module
Who It Is For
- Genset packagers matching an engine to an alternator
- Rental power companies rebuilding sets between contracts
- Industrial sites replacing the prime mover in an existing canopy
- Telecom and data infrastructure contractors specifying standby power
Problems It Solves
- An engine that does not hold speed under block load makes the whole set unusable.
- Packagers lose weeks when the engine does not match the alternator and the base frame.
- Standby sets sit idle for months and must still start and take load on demand.
- Identifying the right QSK38-G2 variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Model | QSK38-G2 |
| Type | 12 Cylinders |
| Displacement | 37.7 L |
| Bore x Stroke | 159 * 159 |
| Net Weight | 3825 Kg |
| Overall Dimension | 2081mm*1492mm*1866mm |
| Manufacturing Plant | Chongqing Cummins Plant |
| Rated Power/Speed | 989 kW @ 1500 rpm |
| Standby Output/Speed | 1096 kW @ 1500 rpm |
| Low Idle Speed | 700-800 rpm |
| Fuel Consumption | 62.0 g/kWh |
| Aspiration | Turbocharged, After-cooled |
| Fuel System | Cummins Direct Injection MCRS |
| Electrical System (starter motor/alternator) | 24V Cooling System Design: 2 pump- 2 loop |
Technical Features
- Cylinders: 12 Cylinders
- Displacement: 37.7 L
- Bore and stroke: 159 * 159
- Aspiration: Turbocharged, After-cooled
- Fuel system: Cummins Direct Injection MCRS
- Electrical system: 24V Cooling System Design: 2 pump- 2 loop
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model QSK38-G2 when ordering so the correct variant is supplied.
- Match the flywheel and SAE housing to the alternator before assembly
- Set the governor to the frequency required, 50 Hz or 60 Hz
- Run a load bank test before the set goes into service
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 989 kW on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same QSK38 range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
QSK38-G2 Questions
Is this QSK38-G2 a genuine Cummins engine
What power does the QSK38-G2 produce
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One

Cummins QSK38 Generator Diesel Engine 1280kW Generator Engine Assembly
12-cylinder diesel engine for prime and standby generator sets, supplied as the Cummins QSK38-G5 at 1107 kW from 37.7 L.
View specification
Cummins QSK38 Generator Diesel Engine 1380kW Generator Engine Assembly
Cummins QSK38-G4 12-cylinder diesel engine rated 1231 kW with 37.7 L displacement for prime and standby generator sets.
View specification
Cummins QSK38 Generator Diesel Engine 1220kW Generator Engine Assembly
Cummins QSK38-G3 12-cylinder diesel engine rated 1107 kW with 37.7 L displacement for prime and standby generator sets.
View specificationWhere It Is Used
Quote The QSK38-G2
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.



