Generator Engines · KTA19

Cummins KTA19 Generator Diesel Engine 575 kW Generator Engine Assembly

Name: Cummins KTA19 Generator Diesel Engine 575 kW Generator Engine Assembly
Brand: Cummins
SKU: KTAA19-G8
Availability: InStock

Cummins KTAA19-G8 6-cylinder in-line diesel engine with 19 L displacement for prime and standby generator sets.

Request A Quote Email A Technician

Home
Products
Generator Engines
Cummins KTA19 Generator Diesel Engine 575 kW Generator Engine Assembly

Cummins KTA19 Generator Diesel Engine 575 kW Generator Engine Assembly complete engine assembly

Cummins KTA19 Generator Diesel Engine 575 kW Generator Engine Assembly shown from another angle

Overview

What This Engine Is Built For

The Cummins KTAA19-G8 is a 6-cylinder in-line generator drive diesel engine of 19 L with a 159 * 159 mm bore and stroke supplied by MEP Power as a complete assembly. It is supplied to the rating stated on the data plate. The engine is turbocharged/aftercooled and water cooled, with a Cummins PT Pump, Direct Injection fuel system. It is built at the Chongqing Cummins Plant KTAA19-G8 – Performance Data Engine. Typical duty is prime and standby generator sets; dry weight with flywheel and alternator is 1927 Kg and the overall envelope is 1324mm*835mm*1183mm.

ModelKTAA19-G8

Rated power127.8 L/Kw.h KTAA19-G8

Displacement19 L

AspirationTurbocharged/Aftercooled

Net weight1927 Kg

Key Benefits

Turbocharged/Aftercooled induction with water cooling keeps charge temperature under control in continuous duty.
Dry weight 1927 Kg and envelope 1324mm*835mm*1183mm are published so the installation can be checked before ordering.
Starts without auxiliary aids down to -12℃.
Backed by a written warranty of one year or 1000 hours, whichever comes first
Genuine and OEM options quoted side by side so the budget decides, not the catalogue

Application Scenarios

Prime mover for a new generator set build
Standby set engine replacement
Rental power fleet rebuild
Containerised power module

Who It Is For

Genset packagers matching an engine to an alternator
Rental power companies rebuilding sets between contracts
Industrial sites replacing the prime mover in an existing canopy
Telecom and data infrastructure contractors specifying standby power

Problems It Solves

An engine that does not hold speed under block load makes the whole set unusable.
Packagers lose weeks when the engine does not match the alternator and the base frame.
Standby sets sit idle for months and must still start and take load on demand.
Identifying the right KTAA19-G8 variant from a serial number takes experience; MEP Power checks the configuration before quoting.

Technical data

Specification As Published

Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.

Model	KTAA19-G8
Type	6 Cylinders in Line, 4 Stroke Diesel
Displacement	19 L
Bore x Stroke	159 * 159
Net Weight	1927 Kg
Overall Dimension	1324mm835mm1183mm
Engine Configuration Number	D193091DX02
Manufacturing Plant	Chongqing Cummins Plant KTAA19-G8 – Performance Data Engine
Standby Output/Speed	575 kW/771HP @ 1500 rpm Torque @ Standby Output: 2699/3660 N.m @ 1500 rpm
Low Idle Speed	725-775 rpm
Rated Power	127.8 L/Kw.h KTAA19-G8
Aspiration	Turbocharged/Aftercooled
Fuel System	Cummins PT Pump, Direct Injection
Governor Type	Mechanical Control
Compression Ratio	13.9:1
Electrical System (starter motor/alternator)	24V
Lowest Starting Temp (without auxiliary system)	-12℃
Cooling Method	Water Cooled

Technical Features

Cylinders: 6 Cylinders in Line, 4 Stroke Diesel
Displacement: 19 L
Bore and stroke: 159 * 159
Aspiration: Turbocharged/Aftercooled
Fuel system: Cummins PT Pump, Direct Injection
Governor: Mechanical Control
Electrical system: 24V
Compression ratio: 13.9:1

Quality Control

Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
Engine, configuration and serial numbers are recorded and photographed for the buyer
Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.

Use and Installation Guide

Quote the model KTAA19-G8 and the engine configuration number D193091DX02 when ordering so the correct variant is supplied.
Match the flywheel and SAE housing to the alternator before assembly
Set the governor to the frequency required, 50 Hz or 60 Hz
Run a load bank test before the set goes into service
Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.

Customisation Options

OEM and ODM builds, including your logo and company name on the unit
Cummins engine customisation and modification to your requirement
Mining and special explosion-proof builds
Genuine or OEM parts specified on the quotation

How It Compares

Compared with	What to consider
A larger engine in the same KTA19 range	Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom.
A non-Cummins engine of similar output	Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one.

Questions

KTAA19-G8 Questions

Is this KTAA19-G8 a genuine Cummins engine

MEP Power supplies 100% genuine Cummins engines, generator sets and engine parts, plus OEM units and customised builds. Tell us which you need and the quotation will state clearly whether the unit offered is genuine, OEM or a customised build.

What power does the KTAA19-G8 produce

The rating supplied is stated on the engine data plate.

What warranty comes with the engine

New genuine and OEM engines and generator sets carry one year or 1000 hours, whichever comes first. Inside that period MEP Power supplies replacement parts free of charge and covers the cost of the engine repair for quality faults.

How do I confirm this is the right variant for my machine

Send the engine serial number or the nameplate photograph of the unit being replaced. MEP Power checks it against the KTAA19-G8 configuration before quoting.

How is the engine shipped and what payment terms apply

Shipment is by sea, air or express depending on size and urgency, arranged by MEP Power or by your own forwarder. Payment terms are Alipay, WeChat, T/T or L/C.