Cummins ISF3.8s4141 Diesel Engine 141HP Vehicle Engine Assembly
Cummins ISF3.8s4141 4-cylinder in-line diesel engine rated 105 kW (141 HP) at 2600 rpm with 3.76 L displacement for trucks, buses, coaches and municipal vehicles.
- Home
- Products
- Vehicle Engines
- Cummins ISF3.8s4141 Diesel Engine 141HP Vehicle Engine Assembly
What This Engine Is Built For
The Cummins ISF3.8s4141 is a 4-cylinder in-line vehicle diesel engine of 3.76 L with a 102 * 115 mm bore and stroke supplied by MEP Power as a complete assembly. It is rated at 105 kW (141 HP) at 2600 rpm and develops 450 N.m @ 1200-2200 rpm. The engine is turbocharged & charge air cooled and water cooled, with a Bosch Direct Injection/HPCR, SCR fuel system. It is built at the Dongfeng Cummins Plant and carries Euro V. Typical duty is trucks, buses, coaches and municipal vehicles; dry weight with flywheel and alternator is 335 Kg and the overall envelope is 810mm*695mm*806mm.
Key Benefits
- Delivers 105 kW (141 HP) at 2600 rpm from 3.76 L as a factory-rated assembly.
- Peak torque of 450 N.m @ 1200-2200 rpm holds the load without downshifting or derating.
- Turbocharged & Charge Air Cooled induction with water cooling keeps charge temperature under control in continuous duty.
- Supplied to Euro V, so the unit can be registered in markets that require it.
- Dry weight 335 Kg and envelope 810mm*695mm*806mm are published so the installation can be checked before ordering.
- Rated for continuous running up to 2000 m altitude.
Application Scenarios
- Heavy truck engine assembly replacement
- City bus and coach repower
- Mixer, tipper and refuse body chassis
- Light commercial vehicle conversion
Who It Is For
- Truck and bus fleets doing engine assembly swaps instead of in-frame rebuilds
- Body builders and chassis converters specifying a known driveline
- Workshops supporting Dongfeng and other Cummins-powered vehicles
- Municipal fleets running refuse, mixer and utility bodies
Problems It Solves
- In-frame rebuilds tie up a bay for days and still leave old ancillaries in service.
- Emission compliance has to be matched to the market the vehicle runs in.
- Mixed fleets with several engine families multiply the parts a workshop must carry.
- Identifying the right ISF3.8s4141 variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Model | ISF3.8s4141 |
| Type | 4 Cylinders in Line |
| Displacement | 3.76 L |
| Bore x Stroke | 102 * 115 |
| Net Weight (with flywheel and alternator) | 335 Kg |
| Overall Dimension | 810mm*695mm*806mm |
| Manufacturing Plant | Dongfeng Cummins Plant |
| Rated Power/Speed | 105 kW/141HP |
| Rated Speed | 2600 rpm |
| Max Torque/Speed | 450 N.m @ 1200-2200 rpm |
| Max No-load Governed Speed | 2950 rpm |
| Idle Speed | 750 rpm |
| Min Fuel Consumption | 195g/Kw.h |
| Max Continuous Running Altitude | 2000 m |
| Certification | Euro V |
| Aspiration | Turbocharged & Charge Air Cooled |
| Fuel System | Bosch Direct Injection/HPCR, SCR |
| Compression Ratio | 17.2:1 |
| Starting System | Electrical Starting Motor 24V |
| Starting Temp (with/without auxiliary system) | -10℃/-25℃ |
| Engine Cooling Fluid Volume | 11.1 L |
| Cooling Method | Water Cooled |
Technical Features
- Cylinders: 4 Cylinders in Line
- Displacement: 3.76 L
- Bore and stroke: 102 * 115
- Aspiration: Turbocharged & Charge Air Cooled
- Fuel system: Bosch Direct Injection/HPCR, SCR
- Starting system: Electrical Starting Motor 24V
- Compression ratio: 17.2:1
- Coolant capacity: 11.1 L
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model ISF3.8s4141 when ordering so the correct variant is supplied.
- Match the flywheel housing and clutch to the existing gearbox
- Check the emission level required in the registration market before ordering
- Re-use the vehicle's cooling pack only if it meets the engine's heat rejection
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 105 kW (141 HP) on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same ISF3.8 range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
ISF3.8s4141 Questions
Is this ISF3.8s4141 a genuine Cummins engine
What power does the ISF3.8s4141 produce
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One
Cummins ISF3.8s4168 Diesel Engine 168HP Vehicle Engine Assembly
Cummins ISF3.8s4168 4-cylinder in-line diesel engine rated 125 kW (168 HP) at 2600 rpm with 3.76 L displacement for trucks, buses, coaches and municipal vehicles.
View specification
Cummins ISF3.8s4154 Diesel Engine 154HP Vehicle Engine Assembly
4-cylinder in-line diesel engine for trucks, buses, coaches and municipal vehicles, supplied as the Cummins ISF3.8s4154 at 115 kW (154 HP) at 2600 rpm from 3.76 L.
View specification
Cummins ISF3.8s3168 Diesel Engine 168HP Vehicle Engine Assembly
Cummins ISF3.8s3168 4-cylinder in-line diesel engine rated 125 kW (168 HP) at 2600 rpm with 3.76 L displacement for trucks, buses, coaches and municipal vehicles.
View specificationWhere It Is Used
Quote The ISF3.8s4141
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.