Cummins ISF2.8s4129T Diesel Engine 129HP Vehicle Engine Assembly
4-cylinder in-line diesel engine for trucks, buses, coaches and municipal vehicles, supplied as the Cummins ISF2.8s4129T at 96 kW (129 HP) at 3200 rpm from 2.78 L.
- Home
- Products
- Vehicle Engines
- Cummins ISF2.8s4129T Diesel Engine 129HP Vehicle Engine Assembly
What This Engine Is Built For
MEP Power supplies the Cummins ISF2.8s4129T as a complete 4-cylinder in-line vehicle diesel engine of 2.78 L running a 94 * 100 mm bore and stroke. It is rated at 96 kW (129 HP) at 3200 rpm and develops 310 N.m @ 1600-2700 rpm. The engine is turbocharged & charge air cooled and water cooled, with a Bosch Direct Injection/HPCR, SCR fuel system. It is built at the Dongfeng Cummins Plant and carries Euro III. Typical duty is trucks, buses, coaches and municipal vehicles; dry weight with flywheel and alternator is 214 Kg and the overall envelope is 606mm*641mm*632mm.
Key Benefits
- Delivers 96 kW (129 HP) at 3200 rpm from 2.78 L as a factory-rated assembly.
- Peak torque of 310 N.m @ 1600-2700 rpm holds the load without downshifting or derating.
- Turbocharged & Charge Air Cooled induction with water cooling keeps charge temperature under control in continuous duty.
- Supplied to Euro III, so the unit can be registered in markets that require it.
- Dry weight 214 Kg and envelope 606mm*641mm*632mm are published so the installation can be checked before ordering.
- Rated for continuous running up to 2000 m altitude.
Application Scenarios
- Heavy truck engine assembly replacement
- City bus and coach repower
- Mixer, tipper and refuse body chassis
- Light commercial vehicle conversion
Who It Is For
- Truck and bus fleets doing engine assembly swaps instead of in-frame rebuilds
- Body builders and chassis converters specifying a known driveline
- Workshops supporting Dongfeng and other Cummins-powered vehicles
- Municipal fleets running refuse, mixer and utility bodies
Problems It Solves
- In-frame rebuilds tie up a bay for days and still leave old ancillaries in service.
- Emission compliance has to be matched to the market the vehicle runs in.
- Mixed fleets with several engine families multiply the parts a workshop must carry.
- Identifying the right ISF2.8s4129T variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Model | ISF2.8s4129T |
| Type | 4 Cylinders in Line |
| Displacement | 2.78 L |
| Bore x Stroke | 94 * 100 |
| Net Weight (with flywheel and alternator) | 214 Kg |
| Overall Dimension | 606mm*641mm*632mm |
| Manufacturing Plant | Dongfeng Cummins Plant |
| Rated Power/Speed | 96 kW/129HP |
| Rated Speed | 3200 rpm |
| Max Torque/Speed | 310 N.m @ 1600-2700 rpm |
| Max No-load Governed Speed | 3600 rpm |
| Idle Speed | 750 rpm |
| Min Fuel Consumption | 205g/Kw.h |
| Max Continuous Running Altitude | 2000 m |
| Certification | Euro III |
| Aspiration | Turbocharged & Charge Air Cooled |
| Fuel System | Bosch Direct Injection/HPCR, SCR |
| Compression Ratio | 16.5:1 |
| Starting System | Electrical Starting Motor 24V |
| Starting Temp (with/without auxiliary system) | -10℃/-25℃ |
| Engine Cooling Fluid Volume | 11.1 L |
| Cooling Method | Water Cooled |
Technical Features
- Cylinders: 4 Cylinders in Line
- Displacement: 2.78 L
- Bore and stroke: 94 * 100
- Aspiration: Turbocharged & Charge Air Cooled
- Fuel system: Bosch Direct Injection/HPCR, SCR
- Starting system: Electrical Starting Motor 24V
- Compression ratio: 16.5:1
- Coolant capacity: 11.1 L
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model ISF2.8s4129T when ordering so the correct variant is supplied.
- Match the flywheel housing and clutch to the existing gearbox
- Check the emission level required in the registration market before ordering
- Re-use the vehicle's cooling pack only if it meets the engine's heat rejection
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 96 kW (129 HP) on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same ISF2.8 range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
ISF2.8s4129T Questions
Is this ISF2.8s4129T a genuine Cummins engine
What power does the ISF2.8s4129T produce
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One
Cummins ISF2.8s4107P Diesel Engine 107HP Vehicle Engine Assembly
Cummins ISF2.8s4107P 4-cylinder in-line diesel engine rated 80 kW (107 HP) at 3600 rpm with 2.78 L displacement for trucks, buses, coaches and municipal vehicles.
View specification
Cummins ISF2.8s4161P Diesel Engine 161HP Vehicle Engine Assembly
Cummins ISF2.8s4161P 4-cylinder in-line diesel engine rated 120 kW (161 HP) at 3200 rpm with 2.78 L displacement for trucks, buses, coaches and municipal vehicles.
View specification
Cummins ISF2.8s4148T Diesel Engine 148HP Vehicle Engine Assembly
4-cylinder in-line diesel engine for trucks, buses, coaches and municipal vehicles, supplied as the Cummins ISF2.8s4148T at 110 kW (149 HP) at 3200 rpm from 2.78 L.
View specificationWhere It Is Used
Quote The ISF2.8s4129T
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.