Cummins 6CTAA8.3-M260 Diesel Engine 260HP Marine Diesel Engine
Cummins 6CTAA8.3-M260 6-cylinder in-line diesel engine rated 190 kW (260 HP) at 109kW/284HP @ 2200 rpm with 8.3 L displacement for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges.
- Home
- Products
- Marine Engines
- Cummins 6CTAA8.3-M260 Diesel Engine 260HP Marine Diesel Engine
What This Engine Is Built For
The Cummins 6CTAA8.3-M260 is a 6-cylinder in-line marine diesel engine of 8.3 L with a 114 * 135 mm bore and stroke supplied by MEP Power as a complete assembly. It is rated at 190 kW (260 HP) at 109kW/284HP @ 2200 rpm and develops 1125 N.m @ 1200 rpm. The engine is turbocharged/air-air cooled, with a Weifu PW2000 Pump/ RQV-K Governor fuel system. It is built at the Dongfeng Cummins Plant 6CTAA8.3-M260 and carries CCS Certificates. Typical duty is propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges; dry weight with flywheel and alternator is 674 Kg and the overall envelope is 1360mm*780mm*988mm.
Key Benefits
- Delivers 190 kW (260 HP) at 109kW/284HP @ 2200 rpm from 8.3 L as a factory-rated assembly.
- Peak torque of 1125 N.m @ 1200 rpm holds the load without downshifting or derating.
- Turbocharged/Air-air cooled induction keeps charge temperature under control in continuous duty.
- Supplied to CCS Certificates, so the unit can be registered in markets that require it.
- Dry weight 674 Kg and envelope 1360mm*780mm*988mm are published so the installation can be checked before ordering.
- Published fuel consumption of ≤ 58.3 L/hr 6CTAA8.3-M260 makes running cost predictable.
Application Scenarios
- Main propulsion in a steel workboat
- Auxiliary and deck machinery drive
- Fishing vessel repower
- Harbour tug and pilot boat service
Who It Is For
- Shipyards repowering workboats and fishing vessels
- Boat owners replacing a worn main engine without changing the engine bed
- Marine service yards that keep exchange engines on the shelf
- Fleet operators standardising on one Cummins family across several hulls
Problems It Solves
- A vessel out of service earns nothing, and a mismatched replacement engine means new mounts, new couplings and weeks of yard time.
- Marine duty punishes engines that were never cooled for sea water service.
- Spare parts for grey-import engines are hard to identify years later.
- Identifying the right 6CTAA8.3-M260 variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Model | 6CTAA8.3-M260 |
| Type | 6 Cylinders in Line |
| Displacement | 8.3 L |
| Bore x Stroke | 114 * 135 |
| Net Weight (with flywheel and alternator) | 674 Kg |
| Overall Dimension | 1360mm*780mm*988mm |
| Engine Configuration Number | D413065MX03 |
| Manufacturing Plant | Dongfeng Cummins Plant 6CTAA8.3-M260 |
| Rated Power/Speed | 190 kW/260HP @ 2134 rpm Max. Power/ |
| Rated Speed | 109kW/284HP @ 2200 rpm |
| Max Torque/Speed | 1125 N.m @ 1200 rpm |
| Torque/Rated Speed | 650 N.m @ 2328 rpm |
| Low Idle Speed | 600-800 rpm |
| High Idle Speed | 2430 rpm |
| Fuel Consumption (running speed) | ≤ 58.3 L/hr 6CTAA8.3-M260 |
| Certification | CCS Certificates |
| Aspiration | Turbocharged/Air-air cooled |
| Fuel System | Weifu PW2000 Pump/ RQV-K Governor |
| Starting System | Electrical Start (12V/24V) |
| Governor Type | Mechanical Control |
| Compression Ratio | 17.3:1 |
| Engine Cooling Fluid Volume | 11.4 L |
| Lowest Starting Temp (without auxiliary system) | -12℃ |
Technical Features
- Cylinders: 6 Cylinders in Line
- Displacement: 8.3 L
- Bore and stroke: 114 * 135
- Aspiration: Turbocharged/Air-air cooled
- Fuel system: Weifu PW2000 Pump/ RQV-K Governor
- Governor: Mechanical Control
- Starting system: Electrical Start (12V/24V)
- Compression ratio: 17.3:1
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model 6CTAA8.3-M260 and the engine configuration number D413065MX03 when ordering so the correct variant is supplied.
- Check the gearbox reduction ratio and propeller match before ordering
- Confirm raw-water or keel cooling to suit the hull
- Commission with the exhaust system and sea water pump connected as supplied
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 190 kW (260 HP) on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same 6CTAA8.3 range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
6CTAA8.3-M260 Questions
Is this 6CTAA8.3-M260 a genuine Cummins engine
What power does the 6CTAA8.3-M260 produce
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One
Cummins 6CTAA8.3-M260 190KW 260HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins 6CTAA8.3-M260 at 190 kW (260 HP) at 109kW/284HP @ 2200 rpm from 8.3 L.
View specification
Cummins MTAA11 282KW 380HP Marine Diesel Engine
Cummins MTAA11 6-cylinder in-line diesel engine rated 380 HP at 1500rmp with 10.8 L displacement for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges.
View specification
Cummins MTAA11 234KW 315HP Marine Diesel Engine
6-cylinder in-line diesel engine for propulsion and auxiliary duty on workboats, fishing vessels, tugs and barges, supplied as the Cummins MTAA11 at 315 HP at 1500rmp from 10.8 L.
View specificationWhere It Is Used
Quote The 6CTAA8.3-M260
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.