Cummins 45KVA Generator Cummins 4BT3.9-G1 36KW 45KVA Generator
Cummins 4BT3.9-G1 diesel generator set rated 38 kVA at 1500 rpm with 3.9L displacement for prime and standby power on site.
- Home
- Products
- Generator Sets
- Cummins 45KVA Generator Cummins 4BT3.9-G1 36KW 45KVA Generator
What This Engine Is Built For
The Cummins 4BT3.9-G1 is a 4-cylinder diesel generator set of 3.9L with a 102×120 mm bore and stroke supplied by MEP Power as a complete assembly. It is rated at 38 kVA at 1500 rpm. The engine is turbocharged and water cooled. Typical duty is prime and standby power on site.
Key Benefits
- Delivers 38 kVA at 1500 rpm from 3.9L as a factory-rated assembly.
- Turbocharged induction with water cooling keeps charge temperature under control in continuous duty.
- Published fuel consumption of 210 L/hr makes running cost predictable.
- Output 400/230V at 50HZ as supplied, matched at the factory.
- Backed by a written warranty of one year or 1000 hours, whichever comes first
- Genuine and OEM options quoted side by side so the budget decides, not the catalogue
Application Scenarios
- Factory standby power
- Data centre and hospital backup
- Off-grid site and mine power
- Rental power package
Who It Is For
- Factories and processing plants needing standby power for the whole site
- Hospitals, data centres and office buildings with critical loads
- Construction sites and mines working off-grid
- Contractors supplying rental power packages
Problems It Solves
- An outage costs more per hour than the set itself.
- Sets assembled from mismatched parts never reach their rated output.
- Remote sites cannot wait weeks for a spare part to be identified.
- Identifying the right 4BT3.9-G1 variant from a serial number takes experience; MEP Power checks the configuration before quoting.
Specification As Published
Values below are the published data for this unit. Where a figure is not listed it was not stated by the source data sheet; ask and we will confirm before you order.
| Generator Set Model | HY-G30 |
| Prime Power | 30kw/38kva |
| Standby Power | 33kw/42kva |
| Output Voltage | 400/230V |
| Frequency | 50HZ |
| Rated Current | 59A |
| Rated Speed | 1500 |
| Power Factor | COSΦ=0.8(lagging) |
| Fuel Consumption | 210 L/hr |
| Battery Rated Capacity | 100AH 2PCS |
| Engine Model | 4BT3.9-G1 Cylinder NO. 4 Cylinders in-line |
| Bore x Stroke | 102×120 |
| Displacement | 3.9L |
| Exhaust Temperature | 380 |
| Lubricating Oil Capacity | 10.9 L Liquid cooling capacity(L) 18.47 L |
| Oil Consumption | 0.3 g/kW.h |
| Aspiration | Turbocharged |
| Starting System | Electrical start (24V) |
| Cooling System | water cooling |
| Governor Type | Machanical Control |
| Brand | HY |
| Model | HY-G30 |
| Rated Capacity | 30kw/38kva |
| Enclosure Rating | IP22 |
| Insulation Class | H |
| Number of Cylinders | 4 cylinders |
Technical Features
- Displacement: 3.9L
- Bore and stroke: 102×120
- Aspiration: Turbocharged
- Governor: Machanical Control
- Starting system: Electrical start (24V)
Quality Control
- Every engine is inspected by the MEP Power inspection team before it leaves the warehouse
- Engine, configuration and serial numbers are recorded and photographed for the buyer
- Genuine and OEM units are quoted separately so the buyer knows exactly what is supplied
- Warranty on genuine and OEM new engines and generator sets is one year or 1000 hours, whichever comes first; parts and repair labour are covered for quality faults inside that period.
Use and Installation Guide
- Quote the model 4BT3.9-G1 when ordering so the correct variant is supplied.
- Confirm voltage, frequency and connection type before shipment
- Allow for ventilation and exhaust routing in the plant room
- Exercise standby sets under load at regular intervals
- Keep the warranty terms in mind: one year or 1000 hours, whichever comes first.
Customisation Options
- OEM and ODM builds, including your logo and company name on the unit
- Cummins engine customisation and modification to your requirement
- Mining and special explosion-proof builds
- Genuine or OEM parts specified on the quotation
How It Compares
| Compared with | What to consider |
|---|---|
| A rebuilt or used engine of the same rating | A rebuilt unit may show the same 38 kVA on paper, but its running history is unknown and the warranty rarely covers the whole engine. |
| A larger engine in the same 4BT3.9 range | Moving up a frame size adds weight, envelope and fuel burn; specify the next size up only if the duty cycle really needs the headroom. |
| A non-Cummins engine of similar output | Parts and service for Cummins families are available in most markets, which matters more over ten years than the purchase price on day one. |
4BT3.9-G1 Questions
Is this 4BT3.9-G1 a genuine Cummins engine
What power does the 4BT3.9-G1 produce
Can the set be supplied for my voltage and frequency
What warranty comes with the engine
How do I confirm this is the right variant for my machine
How is the engine shipped and what payment terms apply
Other Models Buyers Compare With This One

Cummins 4BT3.9-G2 36KW 45KVA Generator
Cummins 4BT3.9-G1 diesel generator set rated 45 kVA at 1500 rpm with 3.9L displacement for prime and standby power on site.
View specification
Cummins 6ZTAA13-G3 300KW 375KVA Generator
Diesel generator set for prime and standby power on site, supplied as the Cummins 6ZTAA13-G3 at 375 kVA at 1500 rpm from 13L.
View specification
Cummins 6ZTAA13-G2 350KW 487.5KVA Generator
Cummins 6ZTAA13-G2 diesel generator set of 13L delivering 438 kVA at 1500 rpm used for prime and standby power on site.
View specificationWhere It Is Used
Quote The 4BT3.9-G1
Send your serial number or nameplate photograph and we will confirm the configuration, then price genuine and OEM options side by side.



