The slab is a near-white neutral surface with subtle variations in lightness across the surface. No distinct veining or chip structure is present.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
Statuario Mona Lisa ASM3202 is a marble-look engineered quartz slab with a consistent near-white neutral tone. It is used by slab importers, countertop fabricators, and builders for interior surfaces. The slab fits into the light grey and white colour group.
Slab importers, countertop fabricators, and builders seeking a uniform near-white neutral surface
Sourcing a consistent, low-variation near-white neutral slab with reliable supply from a factory with stable production capacity
Consistent near-white neutral appearance across all slabs
Resistant to stains and scratches due to polymer resin binding
Available in multiple thicknesses and surface textures
Compared with natural marble this slab does not need sealing and does not etch under kitchen acids. Compared with sintered stone it is easier to fabricate but less tolerant of a hot pan placed directly on the surface.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | Statuario Mona Lisa ASM3202 |
|---|---|
| Collection | ASM Marble-Look Quartz |
| Material | 93% natural quartz aggregate bound with polymer resin and pigment |
| Quartz content | 93% |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Kitchen work is where most of our slab volume ends up, and it is the least forgiving application in the catalogue.
Vanity work is a small-part business: many pieces, tight sizes, high cut-out count.
Hospitality projects buy a look once and then need it repeated across hundreds of rooms and several phases.
All slabs have a near-white neutral appearance with minimal variation in lightness.
Yes, standard edge profiles are available, and custom profiles can be requested during fabrication.
Yes, custom thicknesses are available upon request for production orders.
Yes. Email [email protected] with the code Statuario Mona Lisa ASM3202, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Tell us the thickness, finish and quantity you need and we will come back with availability.