A dark slab with a neutral tone and even consistency across the surface. The colour cast remains uniform with no visible variation or contrast.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
Soft Wind is a dark grey quartz slab with a neutral, consistent appearance. It is used by slab importers, countertop fabricators, and builders for residential and commercial interiors. The slab fits well in modern, minimalist spaces where a solid, uniform look is desired.
Slab importers and countertop fabricators seeking consistent, dark neutral slabs
Sourcing slabs with even tone and neutral cast without colour variation or distracting patterns
Uniform tone reduces visual inconsistency in large installations
Neutral cast complements a wide range of cabinetry and finishes
High quartz content ensures durability and resistance to wear
Compared with natural marble this slab does not need sealing and does not etch under kitchen acids. Compared with sintered stone it is easier to fabricate but less tolerant of a hot pan placed directly on the surface.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | Soft Wind |
|---|---|
| Collection | ASZ Signature Quartz |
| Material | 93% natural quartz aggregate bound with polymer resin and pigment |
| Quartz content | 93% |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
No. The slab has a uniform tone with no veining or noticeable variation. The appearance is consistent across the entire surface.
The slab is available in polished, honed, and leathered finishes. Each offers a different tactile and visual effect while maintaining the neutral tone.
Yes. Standard thicknesses are 2 cm and 3 cm. Custom thicknesses are available upon request.
Yes. Email [email protected] with the code Soft Wind, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Tell us the thickness, finish and quantity you need and we will come back with availability.