The slab is a near-black neutral surface with uniform dark tones. No visible veining or chips are present in the tones range.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
ASST026 is a sintered mineral stone slab produced in a factory with ISO 9001 standards. It is used by slab importers, countertop fabricators, and builders for interior surfaces. The slab is part of the Sintered Stone collection with a dark grey and black colour group.
Slab importers and countertop fabricators seeking a uniform dark neutral surface
Sourcing a consistent, dark neutral slab with minimal variation across batches
Consistent dark tone across all slabs
High quartz content ensures durability
Available in multiple thicknesses and textures
Compared with engineered quartz this slab has no resin binder, so heat marking is not the failure mode it is on quartz. It is denser and needs careful handling in large formats.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | ASST026 |
|---|---|
| Collection | Sintered Stone |
| Material | Sintered mineral stone |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Kitchen work is where most of our slab volume ends up, and it is the least forgiving application in the catalogue.
Cladding is a yield exercise.
Furniture makers buy stone by the piece, not the container, and they need the same top made a hundred times.
Yes, free samples are available for distributors, builders, and countertop factories.
The slab is available in polished, honed, and leathered finishes.
Yes, standard thicknesses are 2 cm and 3 cm, with custom thickness on request.
Yes. Email [email protected] with the code ASST026, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Tell us the thickness, finish and quantity you need and we will come back with availability.