The slab is a near-white neutral surface with subtle variations in dark warm beige tones. The colour range shows minimal contrast, resulting in a uniform, understated look.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
This sintered mineral stone slab is made with 93% quartz content and manufactured under ISO 9001 standards. It is used by slab importers, countertop fabricators, and builders for interior surfaces. The slab offers consistent colour and durability for commercial and residential applications.
Countertop fabricators and builders seeking a consistent, neutral-toned slab for interior projects
Sourcing a slab with uniform dark warm beige tones that maintain consistency across large orders
High quartz content ensures long-term durability
Consistent colour across all slabs in a batch
Available in multiple thicknesses and surface finishes
Compared with engineered quartz this slab has no resin binder, so heat marking is not the failure mode it is on quartz. It is denser and needs careful handling in large formats.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | ASST024 |
|---|---|
| Collection | Sintered Stone |
| Material | Sintered mineral stone |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Kitchen work is where most of our slab volume ends up, and it is the least forgiving application in the catalogue.
Cladding is a yield exercise.
Furniture makers buy stone by the piece, not the container, and they need the same top made a hundred times.
Yes, free samples are available for distributors, builders, and countertop factories.
The slab is available in polished, honed, and leathered textures.
Yes, standard thicknesses are 2 cm and 3 cm, with custom thicknesses available on request.
Yes. Email [email protected] with the code ASST024, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Tell us the thickness, finish and quantity you need and we will come back with availability.