A mid-tone slab with a neutral cast, featuring a light ground and pronounced dark markings. The contrast between the very light and near-black tones creates a strong visual depth.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
ASR019 is a quartz slab with a balanced, neutral palette suited for modern interiors. It is selected by slab importers, countertop fabricators, and builders for residential and commercial projects. The slab delivers consistent appearance across large installations.
Slab importers, countertop fabricators, and builders seeking consistent, neutral-toned quartz slabs
Sourcing slabs with reliable contrast and neutral tone consistency across large batches can be challenging
High contrast enhances visual interest without overpowering the space
Neutral tones blend easily with a wide range of cabinetry and finishes
93% natural quartz ensures durability and resistance to stains and scratches
Compared with natural marble this slab does not need sealing and does not etch under kitchen acids. Compared with sintered stone it is easier to fabricate but less tolerant of a hot pan placed directly on the surface.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | ASR019 |
|---|---|
| Collection | ASR Quartz |
| Material | 93% natural quartz aggregate bound with polymer resin and pigment |
| Quartz content | 93% |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Kitchen work is where most of our slab volume ends up, and it is the least forgiving application in the catalogue.
Vanity work is a small-part business: many pieces, tight sizes, high cut-out count.
Commercial interiors put surfaces in front of a lot of people and very little maintenance budget.
Yes, standard thicknesses are 2 cm and 3 cm. Custom thicknesses are available upon request.
The slab is available in polished, honed, and leathered finishes to suit different design preferences.
Yes, free samples are shipped to distributors, builders, and countertop fabrication facilities.
Yes. Email [email protected] with the code ASR019, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Tell us the thickness, finish and quantity you need and we will come back with availability.