The slab is a near-white neutral surface with subtle variations in lightness across the surface. No distinct veining or chip structure is present.
Swatches sampled from the slab photograph. Screen colour is not slab colour, so approve a physical sample before ordering.
ASNC16 is a crystallised nano glass slab from the Nano Glass collection. It is used by slab importers, countertop fabricators, and builders for interior surfaces requiring a clean, uniform look.
Slab importers and countertop fabricators seeking consistent near-white neutral slabs
Sourcing slabs with uniform light neutral tones that maintain consistency across batches and large orders
Consistent near-white neutral tone across all slabs
Suitable for modern and minimalist interior designs
Resistant to stains and scratches due to crystallised structure
Compared with white quartz this surface has no pattern at all, so a large white area stays visually uniform. It is a specification choice when any veining would be wrong.
Values marked TBC are confirmed per order rather than guessed at here.
| Colour code | ASNC16 |
|---|---|
| Collection | Nano Glass |
| Material | Crystallised nano glass |
| Thickness | 2 cm and 3 cm standard, custom on request |
| Surface finish | Polished, honed or leathered |
| Edge profiles | Six profiles including bullnose, ogee bullnose step, radius and mitre |
| Slab size | TBC - confirmed per order |
| Minimum order quantity | TBC - confirmed per order |
| Production standard | ISO 9001 production control |
| Manufactured in | Nanyang, Henan, China |
Quartz aggregate, resin and pigment are weighed to the recipe recorded against the colour code.
The mix is laid up so the pattern falls the way the design specifies rather than at random.
The slab is compacted under vacuum and vibration to drive out air voids.
The pressed slab is cured so the binder reaches full strength before any machining.
Slabs are calibrated to thickness and finished polished, honed or leathered.
Slabs are checked against the colour code, then bundled on A-frames for sea freight.
Store slabs vertically on an A-frame. Flat stacking large formats invites cracks that only show when the slab is lifted.
Confirm vein direction before cutting on patterned codes, and dry-lay bookmatched pairs before committing the cut.
Warm water, a soft cloth and a mild detergent. Avoid oven cleaner, drain products and abrasive pads on a polished finish.
Yes, free samples are available for distributors, builders, and countertop factories.
Polished, honed, and leathered finishes are available for this slab.
Yes, standard thicknesses are 2 cm and 3 cm, with custom thickness on request.
Yes. Email [email protected] with the code ASNC16, the thickness and the finish you want, plus a shipping address. Samples are free to distributors, builders and countertop factories.
2 cm and 3 cm are standard across the range. Custom thicknesses are developed on request.
Order against the same code, thickness and finish. Codes are produced to a recorded recipe, which is what makes a repeat order match.
Tell us the thickness, finish and quantity you need and we will come back with availability.