Sensor Soap Dispenser
Soap Dispenser-YBA03
Soap Dispenser-YBA03 is a sensor soap dispenser from Funmax, built in brass. It is offered in chrome.
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Capacity | 1000ml/1500ml Soap Viscosity:1-3500mPa.s/0.1-80mPa.s |
|---|---|
| Material | copper |
| Finish | chrome Sensing Distance:5-15cm |
| Finish options | Chrome |
| Material family | brass |
| Category | Sensor Soap Dispenser |
Key benefits
Why Specify This Model
- Brass or copper in the wetted body, not plated pot metal alone.
- Made in the same factory as the rest of the Commercial Washroom Solutions range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- Touch points at the soap station are the hardest part of a washroom to keep hygienic.
- Battery units with poor sensor tuning either fire at passers-by or fail to trigger.
- Mixed manual and automatic fittings send an inconsistent message to guests.
Who it is for
Specified By
- Hotels standardising on touch-free washrooms
- Healthcare and laboratory facilities
- Food service and hospitality operators
Application scenarios
Where It Is Installed
- Hotel guest and public washrooms
- Clinics and medical centres
- Restaurant and food service washrooms
- Office end-of-trip facilities
Customisation
Options
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
Comparison
How It Compares
- Zinc-only tap bodies
- Zinc bodies sold as brass fail at the cartridge seat under commercial duty cycles. The wetted body here is copper based.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Clean with a neutral detergent and a soft cloth. Avoid abrasive cleaners and solvents, which dull the finish.
- Send the model code Soap Dispenser-YBA03 over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
Related products
Others in Sensor Soap Dispenser
FAQ
Soap Dispenser-YBA03 — Questions
What is the Soap Dispenser-YBA03 made from?
Brass, as stated on our datasheet for this model.
Which finishes can I order?
This model is listed in chrome. If you need a finish that is not on this list, ask us before you specify it.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The sensor soap dispenser range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Soap Dispenser-YBA03
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.