Grab Bar
Grab Bar-ZA04-400400
The Grab Bar-ZA04-400400 sits in our grab bar range, built in SUS304 stainless steel. It measures ¢32 × 1.5 × 400 × 400mm. It is offered in polished, gun grey and white, so it can be matched to the rest of the fittings in the same room.
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Size | ¢32*1.5*400*400mm |
|---|---|
| Material | SUS304 |
| Finish | Polished Gun Metal White |
| Finish options | Polished, Gun Grey, White |
| Material family | SUS304 stainless steel |
| Category | Grab Bar |
Key benefits
Why Specify This Model
- SUS304 stainless steel body, specified for humid bathroom and washroom air rather than dry interior use.
- Available in 3 finishes (polished, gun grey and white), so one specification covers rooms with different finish schedules.
- Published overall size of ¢32 × 1.5 × 400 × 400mm for setting-out before the wall is closed up.
- Made in the same factory as the rest of the Commercial Washroom Solutions range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- Grab bars finished in chrome-plated steel corrode at the flange where water sits.
- A bar that is not offered in the length the drawing calls for forces a redesign of the whole cubicle.
- Mixed finishes across bars, rails and accessories make an accessible washroom read as an afterthought.
Who it is for
Specified By
- Healthcare and aged care project specifiers
- Accessible hotel room fit-out contractors
- Public building accessibility upgrades
Application scenarios
Where It Is Installed
- Accessible hotel bathrooms
- Hospital and clinic washrooms
- Aged care wet rooms
- Public accessible toilets
Customisation
Options
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Comparison
How It Compares
- Chrome-plated mild steel
- Plated mild steel relies on the plating for corrosion resistance. Once it is chipped at a fixing or a flange, the steel underneath rusts. This model is stainless through the section.
- Single-finish ranges
- A single-finish range forces a substitute when the schedule changes. This model is made in polished, gun grey and white.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Clean with a neutral detergent and a soft cloth. Avoid chloride-based or abrasive cleaners, which attack the passive layer on stainless steel.
- Send the model code Grab Bar-ZA04-400400 over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
- Mixed-finish orders across one series for projects with more than one room standard.
Related products
Others in Grab Bar
Read next
Guides and Applications
FAQ
Grab Bar-ZA04-400400 — Questions
What is the Grab Bar-ZA04-400400 made from?
SUS304 stainless steel, as stated on our datasheet for this model.
What size is the Grab Bar-ZA04-400400?
¢32 × 1.5 × 400 × 400mm. Use this for setting-out and send us your wall build-up over WhatsApp if you need the fixing detail confirmed.
Which finishes can I order?
This model is listed in polished, gun grey and white. If you need a finish that is not on this list, ask us before you specify it.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The grab bar range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Grab Bar-ZA04-400400
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.