Floor Drain
Floor Drain-ZDE5
Floor Drain-ZDE5 is a floor drain from Funmax, built in SUS304 stainless steel. It measures 300 × 55 × 18 × 3.0mm. It is offered in gun grey. Datasheet description: Fast Drainage, Anti-odor, Anti-mosquito.
Minimum order quantity and lead time depend on the finish and the quantity — message us with the model code and we will confirm directly.
| Features | Fast Drainage, Anti-odor, Anti-mosquito |
|---|---|
| Size | 300*55*18*3.0mm |
| Material | SUS304 |
| Finish | Gun grey / brush nickle |
| Finish options | Gun Grey |
| Material family | SUS304 stainless steel |
| Category | Floor Drain |
Key benefits
Why Specify This Model
- SUS304 stainless steel body, specified for humid bathroom and washroom air rather than dry interior use.
- Published overall size of 300 × 55 × 18 × 3.0mm for setting-out before the wall is closed up.
- Made in the same factory as the rest of the Hospitality Bathroom Products range, which keeps finishes consistent across a project.
Problems it solves
What It Prevents
- A drain that only comes in stock lengths forces the tile setting-out to change.
- Chrome-plated gratings pit and stain where shower products sit on them.
- Point drains in a level-access wet room mean falls in four directions across a large tile.
Who it is for
Specified By
- Hotel wet room contractors
- Residential developers
- Accessible bathroom projects
- Tiling and waterproofing contractors
Application scenarios
Where It Is Installed
- Level-access hotel wet rooms
- Residential shower rooms
- Accessible wet rooms
- Spa and pool changing areas
Technical features
From the Datasheet
- Fast Drainage, Anti-odor, Anti-mosquito
Comparison
How It Compares
- Chrome-plated mild steel
- Plated mild steel relies on the plating for corrosion resistance. Once it is chipped at a fixing or a flange, the steel underneath rusts. This model is stainless through the section.
Use guide
Before and After Installation
- Check the published size against your setting-out before the wall is closed up.
- Confirm the fixing detail for your wall build-up with us before ordering.
- Clean with a neutral detergent and a soft cloth. Avoid chloride-based or abrasive cleaners, which attack the passive layer on stainless steel.
- Send the model code Floor Drain-ZDE5 over WhatsApp if you need the packing detail before shipment.
Quality control
What We Check
- Dimensions checked against the datasheet before packing.
- Finish inspected for consistency across the batch, since a visible difference between two items in one room is the defect that gets reported.
- Each item packed individually to survive container handling.
Customisation
What Can Change
- Made to project size — this range is built to the opening your drawing leaves rather than to stock sizes only.
- Finish selection from the options listed on this page.
- Project quantities packed and marked to your requirement.
Related products
Others in Floor Drain
Read next
Guides and Applications
FAQ
Floor Drain-ZDE5 — Questions
What is the Floor Drain-ZDE5 made from?
SUS304 stainless steel, as stated on our datasheet for this model.
What size is the Floor Drain-ZDE5?
300 × 55 × 18 × 3.0mm. Use this for setting-out and send us your wall build-up over WhatsApp if you need the fixing detail confirmed.
Which finishes can I order?
This model is listed in gun grey. If you need a finish that is not on this list, ask us before you specify it.
What is the minimum order quantity?
Minimum order quantity depends on the finish and the model. Send us the quantity you need over WhatsApp and we will confirm it directly rather than quoting a blanket figure.
What is the lead time?
Lead time depends on the finish and the quantity ordered. Message us with the model code and quantity and we will confirm a date.
Can this be matched with other fittings in the same room?
Yes. The floor drain range shares finishes with the rest of the Funmax bathroom and washroom programme. Send us the codes you are pairing and we will confirm the match.
Get a Quote for Floor Drain-ZDE5
Send the quantity and the finish you need. If you want the size checked against a drawing, send that with it.