Name: 24.5×8.25
Brand: Resunyou Co., Limited

24.5×8.25 truck wheel supplied by Resunyou

Home / Wheels and Rims / Tubeless Steel Wheels / 24.5×8.25

24.5×8.25 is a steel rim designed for heavy-duty truck applications, featuring a 10-bolt pattern and a 169 mm offset for stable axle positioning. It supports a rated load of 3250 kg and is b

Overview

24.5×8.25 is a steel rim designed for heavy-duty truck applications, featuring a 10-bolt pattern and a 169 mm offset for stable axle positioning. It supports a rated load of 3250 kg and is built for use with tyres on the drive or trailer axle in commercial transport. The rim profile ensures secure mounting and even load distribution on paved and rough surfaces.

ISO9001
ISO/TS16949
CCC
E-mark
DOT
GSO/GCC
SONCAP
INMETRO
NOM

What 24.5×8.25 Gives the Operator

10-bolt pattern with φ285.75 PCD ensures secure fit on standard truck hubs

169 mm offset provides balanced axle alignment and reduces lateral stress

SR22 screw hole type allows for reliable fastening with standard wheel nuts

V3-20-4 valve type supports consistent air pressure retention

Wind hole design with 2-116×86 configuration improves rim strength under dynamic loads

Application Scenarios

Heavy haul transport on national highways with consistent axle loading
Regional distribution fleets operating on mixed road surfaces including gravel and tarmac
Truck operators using dual rear wheels where rim stability under load is critical

Who It Is For

Truck importers sourcing steel rims for container shipments
Fleet operators replacing rims on older truck models with 24.5×8.25 specifications
Distributors needing a standard rim size compatible with common TBR tyre sizes

What It Is Meant To Fix

Rims that wobble or misalign due to incorrect offset or bolt pattern

Valve leaks caused by mismatched or low-quality valve fittings

Hub damage from improper bolt hole configuration or insufficient rim strength

Inconsistent load distribution due to poor rim profile or offset mismatch

Published Data For 24.5×8.25

These are the figures published for this product. Anything not listed here is confirmed in writing before an order.

Model 24.5×8.25
Rated Load 3250kg
Distributed Circle (PCD) φ285.75
Bolt Hole 10-φ32
Center Hole φ222
Screw Hole Type SR22
Offset 169
Wind Hole Type 2-116×86
Valve Type V3-20-4

Technical Features

Model 24.5×8.25 with 10-φ32 bolt holes on φ285.75 PCD
Center hole φ222 for compatibility with standard hub sizes
Offset 169 mm for balanced axle positioning
Wind hole type 2-116×86 for improved structural integrity
Valve type V3-20-4 for reliable air retention and pressure control

Customisation

Rims can be packed with or without valve caps based on buyer request
Surface finish options available upon specification, including galvanised or painted
Container loading can include mixed rim models and sizes in one shipment

Quality Control

Rim dimensions verified against production standards before final assembly
Bolt hole alignment checked for consistency across batches
Surface finish inspected for cracks, burrs, or defects before packaging

How It Compares

Compared with A rim with smaller offset 169 mm offset improves wheel alignment and reduces lateral stress on the axle
Compared with A rim with non-standard valve type V3-20-4 valve is widely compatible with standard air fittings and reduces leak risk