Clinics & Rehabilitation Centres
Rigid cabins, repeatable control and documentation your inspector will ask for. Recommended Oxygen Times chamber models, room requirements, typical configurations and delivery capability for clinics & rehabilitation centres.
Industry application
Clinics & Rehabilitation Centres
Rigid cabins, repeatable control and documentation your inspector will ask for
Industry pain points
What Makes This Setting Different
Repeatability is the product
A clinical programme needs the same pressure profile every session. Manual regulation introduces variance the practitioner cannot control.
Access and mobility
Clients with limited mobility cannot get down to a floor-level chamber, which rules out most lying formats.
Regulatory responsibility
What is permitted, and who may operate it, differs by country. The buyer carries that obligation and needs the equipment facts to answer it.
Room and building limits
Floor loading, door widths, lift dimensions and power supply all have to be checked before a rigid cabin is ordered.
What buyers need
The Requirements That Actually Decide It
- Automatic pressure regulation with digital monitoring and logging visibility
- Walk-in or seated access for clients with limited mobility
- Full specification sheets for the equipment file
- Installation guidance and long-term technical support
Recommended models
Chambers That Suit This Setting
OHE20 Hard-Shell Sitting Chamber
Stainless-steel sitting cabin · Sit, 1 person · Premium stainless-steel 2.0 ATA sitting chamber with intelligent automatic pressure control and a zero-gravity cabin.
OHC20 Cubic Sitting Chamber
1350 × 780 × 1900 mm · Walk-in, sit upright · Spacious cubic walk-in hard-shell chamber with upright seating and stable 2.0 ATA performance.
OHL15 / OHL19 Hard-Shell Lying Chamber
230 cm L × Ø90 cm · Lie down, 1 person · Premium lie-flat hard-shell chamber in a lightweight aluminum-alloy body, available in 1.5 or 1.9 ATA.
OHS Series Hyperbaric Chamber
2000 x 980 x 1700 mm (1P) / 2000 x 1480 x 1700 mm (2P) · 1 person or 2 persons · Rigid aluminium shell chamber with a 40 mm polycarbonate door, in 1-person and 2-person configurations at 90 kPa.
Typical scenarios
How These Rooms Are Usually Configured
Single treatment room
The OHC20 at 1350 x 780 x 1900 mm gives a walk-in upright cabin in a compact footprint.
Multi-client programme
The OHD15 at 2400 x 1500 x 2000 mm takes approximately 2-3 people per session with a customisable interior.
Client-facing showroom
The OHS Series with a 40 mm polycarbonate door, electric seating and warm LED lighting reads as clinical equipment rather than consumer kit.
Delivery capability
What We Handle From Order To Installation
- Floor loading and access route confirmed before production
- Chamber weights: OHL approximately 100 kg, OHS Series 330 to 380 kg
- Pressure testing, airtightness inspection and control-system testing before dispatch
- Remote installation guidance and operational training
Buyer questions
Clinics & Rehabilitation Centres Questions
Do these chambers carry medical device certification?
Is the information on this site medical advice?
What pressure do clinics usually specify?
What testing is done before shipment?
Related Guides And Solutions
ATA Pressure Explained For Hyperbaric Chamber Buyers
What 1.3, 1.5, 1.9 and 2.0 ATA mean in practice, and how to pick the pressure band before you shortlist a chamber.
Chamber Room Checklist Before You Place The Order
Door widths, lift dimensions, floor loading and power - the checks that decide whether a chamber can be installed at all.
How To Size A Hyperbaric Chamber For Your Users
Diameter, length and entry height decide who actually fits. A dimension-by-dimension guide across all seventeen models.
Chamber Room Planning & Installation
Get the room, the access route and the power right before the chamber ships
Export, Freight & After-Sales Support
Testing, export packing, documentation and the support that comes after
Talk to the factory
Specify A Chamber For Clinics & Rehabilitation Centres
Send the room dimensions, the intended users and how often the chamber will run. We will shortlist models and confirm lead time and freight.
Most enquiries answered within 12 hours · OEM and wholesale welcome
Tell Us What You Need
Send your specification, quantity and destination port. Our engineers reply with a technical proposal and a confirmed lead time.