Home / Industries / Residential solar storage
Residential solar storage
Wall-mounted and stackable 51.2V packs sized against the evening load rather than against the size of the solar array.
Households usually size storage by looking at the solar array, which is the wrong end of the problem. The battery has to cover what the house uses after the sun goes down, and that figure comes from the evening bill, not the roof.
Tell us the inverter brand as well as the capacity. Communication compatibility between pack and inverter is the single most common reason a correctly sized battery still does not work on site.
Typical Applications
- Wall-mounted 5 kWh to 30 kWh packs
- Stackable modules for later expansion
- RS485 and CAN for hybrid inverter pairing
Related Products
Telecom and data centre
48V rack packs specified by hold-up time at the real site load rather than by amp hours on a datasheet.
Golf carts and low speed vehicles
48V and 72V traction packs that drop into lead-acid and AGM trays without rebuilding the compartment.
RV, caravan and marine
12V and 24V house banks with IP65 cases and Bluetooth monitoring for installations that are hard to reach.
Send us the application and the load
Tell us what the pack has to power, for how long, and which inverter or charger it works with. You will get a sized recommendation with capacity, dimensions, BMS rating and cycle life in writing.